Kawasaki Motorcycle Forums - View Single Post

ZX-2R · 05-28-2004

First take a good dual filament bulb and find a good ground and then tape the ground around the base of the bulb...youo can use a piece of wire for this....then take the two wires and while the bike is running touch one of the two wires at a time to the bulb at a time...the one that works is your running light...then while you have that figured out you could test the other one to see that the turn signal wire works to...
Although both running lights may have the same color wire, testing is still the best. IF you don't have any luck there check the fuses...

05-28-2004	#5 (permalink)
ZX-2R Banned BTK Expert Join Date: Mar 2004 Location: Gardner, KS Posts: 2,159	LIGHTS First take a good dual filament bulb and find a good ground and then tape the ground around the base of the bulb...youo can use a piece of wire for this....then take the two wires and while the bike is running touch one of the two wires at a time to the bulb at a time...the one that works is your running light...then while you have that figured out you could test the other one to see that the turn signal wire works to... Although both running lights may have the same color wire, testing is still the best. IF you don't have any luck there check the fuses...