Kawasaki Motorcycle Forums - View Single Post - Vulcan 1500 Classic, blocking air intake valve...

captain Rando · 03-23-2008

Use two marbles, one at each reed valve. These tubes are smaller. That's what we did with my friends 1500 because I was too lazy to pull off the tank or the air box back plate. Or since you are right there already you can put the marbles in the other two hoses that connect perpendicular to the one you have pulled off. It's just easier to remove them later if you must if they are at the reed valves.

03-23-2008	#2 (permalink)
captain Rando Vegas Vulcan BTK Expert Join Date: Jul 2007 Location: Las Vegas, NV Posts: 996	Use two marbles, one at each reed valve. These tubes are smaller. That's what we did with my friends 1500 because I was too lazy to pull off the tank or the air box back plate. Or since you are right there already you can put the marbles in the other two hoses that connect perpendicular to the one you have pulled off. It's just easier to remove them later if you must if they are at the reed valves. __________________ Randall 2006 Vulcan 1600 Classic Last edited by captain Rando : 03-23-2008 at 02:13 PM.