Kawasaki Motorcycle Forums - View Single Post

RichLockyer · 05-15-2008

Two ways to do it.
Drill your triple clamp out to 1/2"
Buy adapter studs. They are 1/2" on one end and thread into the HD risers, and have a 10mm stud on the bottom, so once threaded into the HD risers (and torqued tight with thread lock), they basically convert them into metric risers that accept a 10mm nut on the bottom of the triple clamp.

05-15-2008	#2 (permalink)
RichLockyer Patriot Guardian Extreme Forum Supporter Join Date: May 2006 Location: Chino, CA Posts: 18,940	Two ways to do it. Drill your triple clamp out to 1/2" Buy adapter studs. They are 1/2" on one end and thread into the HD risers, and have a 10mm stud on the bottom, so once threaded into the HD risers (and torqued tight with thread lock), they basically convert them into metric risers that accept a 10mm nut on the bottom of the triple clamp. __________________ - Rich 2006 1600 Classic Member CORVA, BRC Patriot Guard Rider