The 2 shift forks are easy...they go in both grooves...the drive shaft one is the one I'm questioning...it has to be the only reason this thing won't shift. ...it didn't take much force to get the fork to seat in the groove closest to the flywhel side...I just lifted it with a pick while holding the gear sets in place....when its seated in that groove...it appears that the trannys in neutral as both shaft spin freely. I'm going to break the cases again...now for what feels like the 20th time.
Learning curve on this one is WAYYY too much!! It's now not fun to be in this tranny..it's kicking my arse..
|