another quick check is to take a test light at the coil its self and check the 2 wires for power 12v one of the wires should pulse while turning over if not then its the pulser/or wireing but if you dont have power at the coil on ethier legs then you have a broken power wire or blown fuse or bad battery/or weak,and if you have pulse and power and allready replaced the coil have the coil tested by the dealer or you may have a bad ignition wire ohms test the wire it should be low ohms dont know the number off hand then do a resistance test on that wire also,good luck with the repairs -corey-
|