klf 300 timing
hi mate i know it seems very confusing trying to time thes things but it is realy very easy ahhhh ok it does have timing marks on the crank at the top of the gear box just under your hi low range shift bar ther is a big flat head screw just below and to the side of the barrel on the left take it out and turn it over till you see 2 lines then f then t t is top dead center just to the side of the t is a line .line it up to a little notch in wer you unscrewed the fat head screw then thats set move up to the top now now on the cam your right it does have 2 lines with writing beside them find the 1 that says lf 300 i think it is. if that is a bit confusing 4 ya its just easer to just make shure your cam lobes are facing down towards the bottom off the motor wen they are put your cam sproket on and line it up the line in the top off the head cas the cam sproket will only go on 1 way like i sed just make shure your lobes are facing down line up the line on the spoket the the 1 on the head make shur your lining ip up to cep tention on the left side of your timing chane with out turning the motor then wen its all done put your timing chane tentioner in turn the motor over a couple of times and re chek every thing if you need anny thing els just let me know
|