Whats up everyone? I just started playin with an 88 Ninja 600R. Its not my first bike, but it is my first street bike. When I got it it had been sitting for a number of years, since 99 maybe, so I cleaned the carbs, changed the oil, changed the plugs and wires, and flushed the coolant. Its missing the boots between the carbs and the airbox so, I just pulled the airbox out and im going to put individual filters on. Anyways, my problem is when I start the bike, its very hard to start and I have to push start it a lot of the time. After I finally get it started the bike will not run above 7K. When it gets to 7 it just dies. If I give it wide open throttle it will not run, it bogs down and stalls. Low end power is basicly non existant. My question is, would this be due to open carbs or by chance is something else wrong? Am I going to need to rejet? I pulled the plugs out and they're not fouled and I also pulled the carbs back off and recleaned them. I need some suggestions.
__________________
88 Ninja 600- the 40$ project.
|