Yes it does. There's a big nut on top of each fork leg, coming through the upper triple clamp. Remove them and fill. You need to drain the legs first. There should be a small phillips screw low on each of the outer fork leg. Remove them and drain the oil. Remember to support the bike under the frame/engine before you remove the top nuts, or you will get a surprise. You need to figure out how much oil to put in each leg. I don't have that info. If you fill too much oil, the fork will be too stiff.
__________________
Z1-R,H2,W650,H1C,H1D,F-11,G4TR,KV75-A7,MT1,
KV80R-A
Last edited by kawah1c : 09-08-2008 at 02:48 PM.
|