Quote:
Originally Posted by antiq
Let's see if I can clarify. You are disconnecting the power wire to your coil at the wiring harness. Run a wire from the harness to the coil in the relay. Other side of the relay coil goes to ground. Power is brought from the battery or the battery connection on the starter solenoid to the relay. Out from the relay back to the coil.
|
I just sent you a private message before I saw this post because I saw you were online.... sorry to bug you....
The last part of you answer is my grey area, I think
...
This is how I understand it, hopefully I am saying the same thing that you are
#85 goes to the ground point on the frame
# 30 gets a 10 amp fuse and goes to the power from the starter
# 86 goes to the female side of the red/yellow wire in the harness
#87 goes to the male sides of the wires previously in the harness, going into the coils
#87a gets nothing (I get a 5 pint relay)
I hope that is what you are saying....
i am sorry for so many questions... just want to get it right....
Thanks for your help and patience.....