Lower your VN900 for ~$50 using OEM link arm
Lower your VN 900 1” or 2” or 3” using the stock link arm.
Note and disclaimer: You will use your existing OEM link arm from your bike and modify it using a machine shops expertise. The machine shop will have to fill in the exiting holes of the link arm, add ½” of metal to extend the arm (Mine was TIG welded) then re-drill new holes at the proper distances per your desired lowering height. My cost was $45. Your cost may vary based on your negotiating skill and the machine shop.
{Please call around to make sure a qualified machine shop that can perform this work first prior to disassembling your bike}.
Perform at your own risk....This is what I did to my bike and it works perfect.
|