Kawasaki Motorcycle Forums - View Single Post - Kips Exhaust Valve:1999 KX250 Can't Get Out! Help

Arrakkis666 · 09-27-2008

Hello all! I am new to this forum so thank for any and all help!

Here goes... I have taken everything off the cylinder of my 1999 KX250 except the exhaust valve itself. I have removed all the other part of the kips valve set up including all shafts, rods and guides. I am having a hard time trying to remove the MAIN EXHAUST VALVE. I am able to slide it in and out as it would when operating and I can feel the valve open and close in the port but, I just can't figure out how to remove it. Should the whole assembly just slide out and cant do to some carbon build up or am I missing something? PLEASE DO NOT POST TECHNICAL INFO on this matter if you are not a mechanic or have not worked on this particular kips system. Thanks

Check picture below VVVVVVVVVVVVVVVVVVVVVVVVVVVVV
http://i92.photobucket.com/albums/l1...g?t=1222555272

09-27-2008	#1 (permalink)
Arrakkis666 Newbie Join Date: Sep 2008 Location: jackson, NJ Posts: 5	Kips Exhaust Valve:1999 KX250 Can't Get Out! Help Hello all! I am new to this forum so thank for any and all help! Here goes... I have taken everything off the cylinder of my 1999 KX250 except the exhaust valve itself. I have removed all the other part of the kips valve set up including all shafts, rods and guides. I am having a hard time trying to remove the MAIN EXHAUST VALVE. I am able to slide it in and out as it would when operating and I can feel the valve open and close in the port but, I just can't figure out how to remove it. Should the whole assembly just slide out and cant do to some carbon build up or am I missing something? PLEASE DO NOT POST TECHNICAL INFO on this matter if you are not a mechanic or have not worked on this particular kips system. Thanks Check picture below VVVVVVVVVVVVVVVVVVVVVVVVVVVVV http://i92.photobucket.com/albums/l1...g?t=1222555272 Last edited by Arrakkis666 : 09-29-2008 at 03:22 PM.