[elevater]

Pics will be posted soon,too cold for the camera to work this morning. The resevoir is made of 2.5 dia ABS drain pipe,a piece 6"long with an end cap, a 90 deg elbow on the other end. Drlled 2 holes in the 90( 3sizes undersize) heated my inlet and outlet fittings real hot and threaded them in. After cooling a little shoe goop and tried her out. First time ,for safety, dropped the assy in a concrete block and hit the air. Still together after 185 psi and no leaks so in the left side tool space. The long part fits in the weather tight box,lose the lid first, and the 90 with fittings fits in the side cover space leaving room to run air lines and install a quick coupler for tire maint. I will post some pics soon