Quote:
Originally Posted by mad5674
Thanks Bikesrfun, does the Baron come with a matching, tear shaped, chrome cover for the left side after you've taken out the crossover tube and everything, or is it left bare, jugs exposed. Also, do you have to marble, or is that what the tube end caps are for? what happens with the solenoid wires?
Thnx in advance for the info...
Also, I agree with mittens, it would be nice if Dynojet offered a bigger and better selection of maps. My pcIII came with 6 but only 1 is for my year bike, regardless of pipe and intake combinations. All well...BAK intake, and some tinkering with the laptop, and see what I can come up with...  |
None of the intakes come with matching covers for the other side. You can buy another cover by itself and make up a bracket to mount it up if you like. I mounted my horn on the left side. See the photo.....
You should marble or get the reed valve block off kits if you have an aftermarket exhaust, as that will eliminate the popping on deceleration. As for the solenoid wires, just tape the ends so they don't short against anything and tape them back into the harness. If you like, PM me your email address and I will send you a map to try.