[cboutfit]

Hi and Welcome:
I also have the Green and White 04 Classic, it is posted in
"Want to show off your ride"
I put Cabra pipes and a Jet kit in my bike all by my lonesum it was not too difficult.

For the Jet kit do the following
Remove:
front seat
spedo cable from front wheel
Spedo from Tank (only Bottom bolt)
Tank
right side of air box and housing

Unhook:
Choke knob/Idle set
you can then remove carb, you will find several hoses but they are all diffrent and are easy to tell where they go. If you pull the center screw on the cable slides you can slip the cables off with out changing your settings.

after that follow the directions on in your jet kit, you will ned to drill out a cover hiding the mixture screw, change the needle valve and install the main jet.

I have experminted with mine trying differant sizes and at 4500 feet I am running a 130 and can now change them in about 30 to 45 min.

Good Luck and any other questions let me know.