[southjersey636]

Im not sure if your bike is the same as mine but it will be somewhat on the same level.

Basically remove the sprocket nut on the back of the swingarm, loosing up the chain tensioner probally has the locknuts on both sides of the swingarm.

Now tap out the axle to the rear wheel and pull it out the other side, make sure while doing this you keep an eye on how everything goes together. After the axle is out, you can push the wheel torward the bike to get the chain off the sprocket, then just roll the tire out.

This is not hard to do but be VERY careful that the bike is suppored on stands or something.