Quote:
|
Originally Posted by CaddmannQ
There is an article on Gadget's site about restoring the cold idle speed after removing the ICS's. It's simple & only involves putting a rubber or plastic shim over the idle stop stub on the throttle body.
|
Hmm... define "cold"
I put a set of pipes on last night, but didn't have time to install the Fi2000R, and I didn't have the right size caps for the ICS ports.
Finished all of that today, did the AF mod with K&N... bike was obviously dead cold, but ambient was about 85 or so.
Fired right up and didn't stall. If anything, it felt a little less likely to stall when I start getting into the friction zone.
http://personal.linkline.com/rlockyer/vulcan/pipes.jpg
http://personal.linkline.com/rlockye.../caddmanlt.jpg
http://personal.linkline.com/rlockye.../caddmanrt.jpg