HELP looking 4 parts and advice

[southernredhead]

OK all im new to the site and to riding im looking for mirrors,front fairings,and some much needed advice ,,, the guy i bought her off of was going to have her streached but had to sell before he got done my problem is he had the back pegs taken off and had the frame fixed to where i will have to get them welded back on having the back pegs off doesent matter to me as i wont be having passengers EVER but the pegs held on the exaust both of them are being held up with a tie down strap there not going anywhere but i need a more permanat fix so it doesent look so rigged up my husband and i have lowered her some and i also shaved down the seat and recovered it where my feet will touch the ground ((( question is will it hurt the frame to get the pegs welded back on))) whats my best option hear any advice welcome

[MR.S7]

Originally Posted by southernredhead

OK all im new to the site and to riding im looking for mirrors,front fairings,and some much needed advice ,,, the guy i bought her off of was going to have her streached but had to sell before he got done my problem is he had the back pegs taken off and had the frame fixed to where i will have to get them welded back on having the back pegs off doesent matter to me as i wont be having passengers EVER but the pegs held on the exaust both of them are being held up with a tie down strap there not going anywhere but i need a more permanat fix so it doesent look so rigged up my husband and i have lowered her some and i also shaved down the seat and recovered it where my feet will touch the ground ((( question is will it hurt the frame to get the pegs welded back on))) whats my best option hear any advice welcome

MY gOD I READ Half but No problem welding it back if your going to the right place. carefull to disconnect your cdi b4 welding.

[gpzrocker]

Southern Red: where are you located at in NC, just wondering, maybe someone close can recommend someone who can look at it.

And need to know what bike it is, there could be a better/easier way to brace the muffler. Pictures, even with a cell phone camera, can help alot too.

[southernredhead]

mitchell county western mountians the nearest shop is about 1 hour away
so if anyone knowes someone who is closer who can help please let me know

[gpzrocker]

Okey Dokey, so you are Spruce Pine/Burnsville area. I will be seeing some of my motorcycle friends from up there this weekend, (I live in McDowell). We can see who they recommend.

I believe you just need a good welding person, and that should not be to hard to find. MR S-7 up there recommended disconnecting the CDI, that is not hard either, I would disconnect the battery also.

If ya'll wouldn't mind running down to the bottom of 80 this weekend (12th or 13th or before noon on the 14th) with the bike, some of my friends can look at it in person and give suggestions. A couple of them may even get an idea and go get their welding rigs out themselves -- I can't say for sure, but they've done things like that before when the mood struck them.

Our state motorcycle rally is at Tom Johnsons this weekend, and actually one of our guided tours goes all through that area. You might as a bonus meet some riding buddies from your area.