Quote please

kxboblarry · 10-14-2009

Hey I need all these parts for a 2006 KX250f
Wondering how much ?

CHAIN,
CYLINDER
PISTON
PIN-PISTON
RING-SNAP,PISTON PIN
ROD-CONNECTING
BEARING-BIG END
PIN-CRANK
RING-O

"O" RING,22MM
"O" RING,METER GEAR
PLUG,12X9.1
GASKET,CLUTCH COVER,O
GASKET,GENERATOR COVE
GASKET,CLUTCH COVER,I

Bearing for both sides of the rod
BEARING-BALL,CRANKSHA
BEARING-BALL,SX04A81C

*Beartooth Jake* · 10-15-2009

Hello,

I was unable to find the o-rings, and plug by the information provided. Listed below are the rest of the parts requested,

92057-0030
Chain, Cam - Retail $34.56 / Discounted $29.38
11005-0069
Cylinder-Engine - $305.63 / $259.79
13001-0088
Piston-Engine - $97.62 / $82.98
13002-0018
Pin-Piston - $21.92 / $18.63
92033-1161
Ring-Snap, Piston Pin - $2.78 ea / $2.36 ea
13032-0047
Rod-Connecting - $63.60 / $54.06
13034-0014
Bearing-Big End - $50.04 / $42.53
13035-0015
Pin-Crank - $33.11 / $28.14
11061-0031
Gasket, Clutch Cover, O - $15.34 / $13.04
11061-0323
Gasket, Generator Cover - $15.56 / $13.23
11061-0324
Gasket, Clutch Cover, Inner - $24.78 / $21.06
92045-0052
Bearing-Ball, Crankshaft - $41.55 / $35.32
92045-1335
Bearing-Ball, SX04A81C - $42.25 / $35.91

Let me know on the o-rings. Thanks

kxboblarry · 10-15-2009

I need the bearing on each side of the Rod!
Are these the ones?

92045-0052
Bearing-Ball, Crankshaft - $41.55 / $35.32
92045-1335
Bearing-Ball, SX04A81C - $42.25 / $35.91

the plug and orings are for the timing hole covers....I'm just going to reuse mine now.

Thanks for the help

kxboblarry · 4 Weeks Ago

If you can make sure I got the right bearings for both sides of the conn. Rod that would be awsome......
\

*Beartooth Jake* · 3 Weeks Ago

There is one bearing for the connecting rod, and the part number is 13034-0014. Retail is $50.04, and your cost is $42.53. Sorry for the delayed response.

10-14-2009	#1 (permalink)
kxboblarry Full Hot BTK Beginner Join Date: May 2009 Location: Niagara Ontario Posts: 43	Quote please Hey I need all these parts for a 2006 KX250f Wondering how much ? CHAIN, CYLINDER PISTON PIN-PISTON RING-SNAP,PISTON PIN ROD-CONNECTING BEARING-BIG END PIN-CRANK RING-O "O" RING,22MM "O" RING,METER GEAR PLUG,12X9.1 GASKET,CLUTCH COVER,O GASKET,GENERATOR COVE GASKET,CLUTCH COVER,I Bearing for both sides of the rod BEARING-BALL,CRANKSHA BEARING-BALL,SX04A81C __________________ 2006 KX250f 1992 KX500 1967 Chev C10 1982 Yota P/U Last edited by kxboblarry : 10-14-2009 at 03:26 PM.

10-15-2009	#3 (permalink)
kxboblarry Full Hot BTK Beginner Join Date: May 2009 Location: Niagara Ontario Posts: 43	I need the bearing on each side of the Rod! Are these the ones? 92045-0052 Bearing-Ball, Crankshaft - $41.55 / $35.32 92045-1335 Bearing-Ball, SX04A81C - $42.25 / $35.91 the plug and orings are for the timing hole covers....I'm just going to reuse mine now. Thanks for the help __________________ 2006 KX250f 1992 KX500 1967 Chev C10 1982 Yota P/U

4 Weeks Ago	#4 (permalink)
kxboblarry Full Hot BTK Beginner Join Date: May 2009 Location: Niagara Ontario Posts: 43	If you can make sure I got the right bearings for both sides of the conn. Rod that would be awsome...... \ __________________ 2006 KX250f 1992 KX500 1967 Chev C10 1982 Yota P/U

10-15-2009	#2 (permalink)
Beartooth Jake Super Moderator Forum Supporter Join Date: May 2006 Location: Red Lodge, MT Posts: 699	Hello, I was unable to find the o-rings, and plug by the information provided. Listed below are the rest of the parts requested, 92057-0030 Chain, Cam - Retail $34.56 / Discounted $29.38 11005-0069 Cylinder-Engine - $305.63 / $259.79 13001-0088 Piston-Engine - $97.62 / $82.98 13002-0018 Pin-Piston - $21.92 / $18.63 92033-1161 Ring-Snap, Piston Pin - $2.78 ea / $2.36 ea 13032-0047 Rod-Connecting - $63.60 / $54.06 13034-0014 Bearing-Big End - $50.04 / $42.53 13035-0015 Pin-Crank - $33.11 / $28.14 11061-0031 Gasket, Clutch Cover, O - $15.34 / $13.04 11061-0323 Gasket, Generator Cover - $15.56 / $13.23 11061-0324 Gasket, Clutch Cover, Inner - $24.78 / $21.06 92045-0052 Bearing-Ball, Crankshaft - $41.55 / $35.32 92045-1335 Bearing-Ball, SX04A81C - $42.25 / $35.91 Let me know on the o-rings. Thanks

3 Weeks Ago	#5 (permalink)
Beartooth Jake Super Moderator Forum Supporter Join Date: May 2006 Location: Red Lodge, MT Posts: 699	There is one bearing for the connecting rod, and the part number is 13034-0014. Retail is $50.04, and your cost is $42.53. Sorry for the delayed response.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)