Forum: FAQ'S

Hi, I've recently encountered a problem with my 84' Kawasaki 1100 LTD (zn 1100 b-1) When taking off from a stop it seems to stutter (miss) or under load until you reach about 2000 rpm. It runs fine after that. I had the carbs cleaned, put inline fuel filter in, new petcock in, new air filter,...

I'm currently looking for hard bags for a '99 Vulcan en500. Any good suggestions?? I'm not looking to spend a huge amount of money but I want something that can be locked up. I was also considering a trunk-style option that could hold my helmet. The one I really like looks like the rear of a...

Anybody familiar with the laws in Arizona for LED lights. What can you or cant you have. The documentation I have found on the Department of Motor Vehicles seems to be different than a nice police office has informed us.

I'm considering buying a used bike from a dealer next month. Should I invest in the 3 year extended warranty or is it not worth it?

I have the Google maps in my phone, but I find that it is not any good when you get in an area that there are no cell towers !! Sooo, Im looking for a decent GPS, (not the $400 models) but something simple, and accurate to put on the handlebars. Anyone got a suggestions, or comments on size,...

I plan on getting a new sport bike in the next month or two and I am just wondering if anyone has any experience with decal removal. Is it possible to remove the decals from the tank/fairing? Or is it too risky because of scratching the paint, etc. Any experience or thoughts are welcome.

It seems to me that this lifter tick seems to be a normal problem with other 1600 owners. I just wondered if anyone has thought about removing the banjo bolt and drilling out to a bigger size to let more oil flow to the lifters so, they can pump up with oil to quieten them down. The reason I say...

I need to know how the mixture should be determined from base line, what jets I should be running on a stock bike, and where to set the two needle valves (Idler Jets?) the 4 internal jets are clean and my floats are functioning properly. I can't seem to get a decent mix going, 4000RPM is the...

I've recently bought a new 06 V2K and I'm debaffeling the mufflers and installing a Cobra fi2000 and a Hurricane intake , What settings would I need to set the fi2000 controller pots or is it a plug in? Any kind of help would be greatly appreciated. My first time dealing with fuel injection.

I want to put a single seat on my vn 800 classic. I want tocover the seat myself either recover a old one, buy a new seat pan ? Other thing is can I convert the stock seat on the bike, to a single? I Like the Mustang one at £200 +, but can't aford it

Hi All, Not sure where to turn with my bike.It only has 12000 miles,and is super clean.It was never stored outside.It started running erratic,it would cut off while going down the road.It took it to the shop,thinking the problem was carbs.Had them cleaned,bike was diagnosed with bad...

I need to replace my starter clutch and I was told they have to split the case to do it, I have seen a lot of talk about taking it out through the oil pan and if anyone can send me info on how to do that I would greatly appreciate it. I can be reached at onsitepcrepair@aol.com Thanks in advance!

Hi guys, its my 1st time on the forum and i need help setting my cams sprocket im lost...... I bought my bike 2 years ago and im strugling ever since. It drove ok bt change plugs every week, shooting noises thru carbs( intake), weak power & starting problems. I took the head of for cleaning &...

What is the dial to the right of the choke?

My right front turn signal is just hanging there by the wire. I want to change it out but it looks like I'll need a new assembly. Does anybody know where I can buy such an item? I've looked everywhere and can't find what I need. If y'all need pics I can provide them if needed.

on-line seller sold keys in 10psc/lot i dont need 10 pieces of keys any good seller can sell seperate?