wiring up a winch to a 220 bayou

countryboy · 06-02-2007

How/where do i wire this up????? The winch is mounted it in a bracket on the front bumper. Do i splice into the main wire harness????

YurFatMom · 06-04-2007

You should probably check the directions.

Trail Buster · 06-13-2007

No. Keep the wiring separate. If you got a solenoid and a small switch for the handlebars, mount the solenoid in a safe place. Power comes from the battery to the solenoid terminals. 2 other terminals on the solenoid will take cables that go to the winch. 2 small wires go to the handlebar switch from the solenoid to switch it on. You may want to take one of these from a keyed power source.
If you got a generic and no solenoid, The switch is wired the same as a solenoid but without the small remote wire.

06-02-2007	#1 (permalink)
countryboy Newbie Join Date: May 2007 Posts: 24	wiring up a winch to a 220 bayou How/where do i wire this up????? The winch is mounted it in a bracket on the front bumper. Do i splice into the main wire harness????

06-04-2007	#2 (permalink)
YurFatMom Jedi master BTK Expert Join Date: Mar 2007 Location: Middle E., Wisconsin Posts: 3,046	You should probably check the directions. __________________ '03 YZ250 '03 Kodiak 400 '05 YFZ450 I turned blue!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bayou 220 stator, pre-1996 trade/buy read!	farmereinar	Accessory Swap Meet	3	06-17-2009 06:00 AM
kawaski bayou 220	new2atv	Kawasaki ATV and Mule	5	04-12-2008 07:49 PM
wiring on bayou 220 Please help!!!!	dorrt	Kawasaki ATV and Mule	7	05-29-2007 11:44 PM
KLF 220 Bayou Shifting problem	KLF@@)	Kawasaki ATV and Mule	1	09-10-2006 08:22 PM
Bayou 220 Question	36racin	Kawasaki ATV and Mule	2	02-10-2006 06:54 PM

06-13-2007	#3 (permalink)
Trail Buster Newbie Join Date: Jun 2007 Posts: 8	No. Keep the wiring separate. If you got a solenoid and a small switch for the handlebars, mount the solenoid in a safe place. Power comes from the battery to the solenoid terminals. 2 other terminals on the solenoid will take cables that go to the winch. 2 small wires go to the handlebar switch from the solenoid to switch it on. You may want to take one of these from a keyed power source. If you got a generic and no solenoid, The switch is wired the same as a solenoid but without the small remote wire.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)