Bayou 220 Turned Over

scott63 · 08-21-2008

Son turned 220 over and now it won't start. I checked carb and cleaned. I have spark and gas but will not start. Is there a kill switch somewhere?

86klf300guy · 08-21-2008

is your son ok? sorry to hear that he rolled hopefully all is well.but for your machine not starting it would be safe to say the kill switch is ok you have spark,but what was the bike turned over in water,mud,grass.if water or mud may have to dry the cylinder out with compressed air if there is any water or fuel in the cylinder makin it wet it will not go bang is your plug wet with fuel? try dryin the cylinder out no matter what ne how it wouldt hurt nothin. and does it turn over ok nothin draging or turning over really fast like no compression?-corey-

scott63 · 08-21-2008

sounds like turning over really fast.

86klf300guy · 08-22-2008

do a compression test first and let us know what that comes out with...-corey-

scott63 · 08-25-2008

trying to find tester. what should pressure be? I just had rings replaced, new risk pin, new cam.

86klf300guy · 08-25-2008

over 120 psi is ok maybe it sheared the cam gear locateing pin also but do that comp test first -corey-also you can use your finger to see if it pops your finger out will serfice also just to see if the valve train is ok but make sure your plug wire is out of the way or itll be a shocking time in the garage lol -

08-21-2008	#1 (permalink)
scott63 Newbie Join Date: Aug 2008 Posts: 8	Bayou 220 Turned Over Son turned 220 over and now it won't start. I checked carb and cleaned. I have spark and gas but will not start. Is there a kill switch somewhere?

08-25-2008	#6 (permalink)
86klf300guy Can't find time to ride BTK Expert Join Date: Feb 2008 Location: some where in ohio Posts: 538	over 120 psi is ok maybe it sheared the cam gear locateing pin also but do that comp test first -corey-also you can use your finger to see if it pops your finger out will serfice also just to see if the valve train is ok but make sure your plug wire is out of the way or itll be a shocking time in the garage lol - Last edited by 86klf300guy : 08-25-2008 at 08:55 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bayou 220 carburetor clip position. Help!	mdgil	Kawasaki ATV and Mule	1	04-18-2008 09:20 PM
Bayou 250 motor or 220?	Matt R	Kawasaki ATV and Mule	5	01-07-2008 09:18 PM
bayou 220 stator, pre-1996 trade/buy read!	farmereinar	Accessory Swap Meet	2	06-13-2007 10:32 PM
Bayou 220 - Help with Hoses	TAQuickness	Kawasaki ATV and Mule	6	01-16-2007 11:12 AM
Starter Problem Bayou 220	gkru10@comcast.	Kawasaki ATV and Mule	1	03-18-2006 09:31 PM

08-21-2008	#2 (permalink)
86klf300guy Can't find time to ride BTK Expert Join Date: Feb 2008 Location: some where in ohio Posts: 538	is your son ok? sorry to hear that he rolled hopefully all is well.but for your machine not starting it would be safe to say the kill switch is ok you have spark,but what was the bike turned over in water,mud,grass.if water or mud may have to dry the cylinder out with compressed air if there is any water or fuel in the cylinder makin it wet it will not go bang is your plug wet with fuel? try dryin the cylinder out no matter what ne how it wouldt hurt nothin. and does it turn over ok nothin draging or turning over really fast like no compression?-corey-

08-21-2008	#3 (permalink)
scott63 Newbie Join Date: Aug 2008 Posts: 8	sounds like turning over really fast.

08-22-2008	#4 (permalink)
86klf300guy Can't find time to ride BTK Expert Join Date: Feb 2008 Location: some where in ohio Posts: 538	do a compression test first and let us know what that comes out with...-corey-

08-25-2008	#5 (permalink)
scott63 Newbie Join Date: Aug 2008 Posts: 8	trying to find tester. what should pressure be? I just had rings replaced, new risk pin, new cam.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)