V2K left grip removal

mbigica · 2 Weeks Ago

When removing the stock left grip on a V2k does the end cap screw off or do you just cut the whole grip off? I have read that the cap is on with left handed treads, but then I have read other posts saying you just cut the whole thing off.

The bike is an 06 2000 LT.

Weekend project!

BourneTrilogy · 2 Weeks Ago

the left hand screws off first, then you can just remove it. Dan

doug4958 · 1 Week Ago

I just cut mine off, I didn't see anywhere it would screw off.

airchuk · 1 Week Ago

Quote:

I just cut mine off, I didn't see anywhere it would screw off.

The left end cap screws off. There are threads on the end of the bar.

SteelMonkey · 1 Week Ago

Quote:

Originally Posted by airchuk

The left end cap screws off. There are threads on the end of the bar.

+1 mine fell off once, thankfully just in a parking lot so it didn't go to far and I found it again no problem....and just screwed it back on

BrianTSmith99 · 1 Week Ago

Mine is probably different, but the cap screwed off (on pretty tight with thread lock - put a wrench on a screwdriver to unscrew it). Then the grip was glued to the tube that fits around the bar and holds the cable ends. I had to cut the grip to get it off the tube.

Brian

mbigica · 1 Week Ago

Thanks for the replies. I did not get to it today. Hopefully tommorow. Did wash it though.

g1nomad · 1 Week Ago

Quote:

Originally Posted by mbigica

Weekend project!

Are you doing some ISO grips?

Herb

2 Weeks Ago	#1 (permalink)
mbigica Clutch Cadet BTK Expert Join Date: Feb 2007 Location: Cedar Park, TX Posts: 379	V2K left grip removal When removing the stock left grip on a V2k does the end cap screw off or do you just cut the whole grip off? I have read that the cap is on with left handed treads, but then I have read other posts saying you just cut the whole thing off. The bike is an 06 2000 LT. Weekend project!

2 Weeks Ago	#2 (permalink)
BourneTrilogy Total Package BTK Beginner Join Date: Jul 2008 Location: Wilmington NC Posts: 85	It screws off the left hand screws off first, then you can just remove it. Dan

1 Week Ago	#3 (permalink)
doug4958 V2K Classic BTK Intermediate Join Date: Jul 2008 Location: TN Posts: 151	I just cut mine off, I didn't see anywhere it would screw off. __________________ Doug B http://i605.photobucket.com/albums/t...8/DSC00129.jpg USMC Ret

1 Week Ago	#6 (permalink)
BrianTSmith99 Third Gear And Gaining BTK Intermediate Join Date: Sep 2008 Posts: 125	Mine is probably different, but the cap screwed off (on pretty tight with thread lock - put a wrench on a screwdriver to unscrew it). Then the grip was glued to the tube that fits around the bar and holds the cable ends. I had to cut the grip to get it off the tube. Brian __________________ '08 Ninja 500 '85 Pontiac Fiero with 4.9l Caddy V8

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Massachusetts/New England riders	cjp91068	Rides, Events and Rallies!	537	09-14-2009 02:46 PM
Vulcan 500 Grip Replacement	philipd	Projects and "How To" Write Ups	15	02-28-2009 08:56 PM
Sad news, decided to sell Bluebelle!!	SilverEagle	Kawasaki Cruisers	31	03-28-2007 10:50 AM
iso grip removal	sdm74	Kawasaki Cruisers	7	01-29-2007 05:31 PM
After market grip removal	BFC	Kawasaki Cruisers	7	07-31-2004 11:13 AM

1 Week Ago	#7 (permalink)
mbigica Clutch Cadet BTK Expert Join Date: Feb 2007 Location: Cedar Park, TX Posts: 379	Thanks for the replies. I did not get to it today. Hopefully tommorow. Did wash it though.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)