Kuryakyn ISO Grips on 1600 Nomad

Mighty Mouse · 10-28-2005

Got another question for ya all. On an '06 1600 Nomad, which Kuryakyn ISO grip should I be getting? The 6235 comes with a new throttle sleeve included I believe and the 6240 is the universal for 1" bars that re-uses the stock throttle sleeve. Not sure which of these is right for this bike.

Any help would be greatly appreciated!

MM

bluestringer · 10-28-2005

Either one will work, but the 6235 with the throttle sleeve is the best way to go IMO.

*pitchinguy* · 10-28-2005

Got mine for my 05 1600 from a Kaw dealer & it had the sleeve.
Anyways, I likes em!!

Paco · 10-28-2005

I put the slip on, much esier to install.

10-28-2005	#1 (permalink)
Mighty Mouse Finally Got Into First Gear BTK Beginner Join Date: Oct 2005 Location: Arlington, TX Posts: 64	Kuryakyn ISO Grips on 1600 Nomad Got another question for ya all. On an '06 1600 Nomad, which Kuryakyn ISO grip should I be getting? The 6235 comes with a new throttle sleeve included I believe and the 6240 is the universal for 1" bars that re-uses the stock throttle sleeve. Not sure which of these is right for this bike. Any help would be greatly appreciated! MM

10-28-2005	#2 (permalink)
bluestringer Rebel Rider BTK Expert Join Date: Jul 2004 Location: Albany, Georgia Posts: 3,007	Either one will work, but the 6235 with the throttle sleeve is the best way to go IMO. __________________ ..... bluestringer 2005 Vulcan 1500 Classic FI V&H Longshots VROC #13910 GAVROC #159

10-28-2005	#3 (permalink)
pitchinguy Deron...THE..."big guy"! Extreme Forum Supporter Join Date: Dec 2004 Location: Virginia Posts: 7,828	Got mine for my 05 1600 from a Kaw dealer & it had the sleeve. Anyways, I likes em!! __________________ *LIGHT ENGINEER Todd's Body Paint Team* *Black 1600w/apes*

10-28-2005	#4 (permalink)
Paco Turtle Wax Taster BTK Intermediate Join Date: Feb 2004 Location: Greenwood, In Posts: 151	I put the slip on, much esier to install. __________________ Paco 06 KLR 650 VROC 6598 Greenwood, In

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)