Caddman Mod and PCIII?

Kebo · 11-25-2005

I already have a PCIII on my bike.....I was wondering if anyone had the Caddman mod installed along with the PCIII? If so, could they send me a copy of their map. I have the parts to do the mod but I am not local to a Dynojet to get the correct mapping. Thanks Kebo

Phatboy · 11-26-2005

My map is on the yahoo VN1600 page. Thunder mfg and powercommander also have some maps availible on their pages. With the money you save w/ caddman you can afford a dyno tune, right

Eight tuning centers in Ga http://www.powercommander.com/centers_ga.shtml

Kebo · 11-26-2005

Quote:

Originally Posted by Phatboy

My map is on the yahoo VN1600 page. Thunder mfg and powercommander also have some maps availible on their pages. With the money you save w/ caddman you can afford a dyno tune, right

Eight tuning centers in Ga http://www.powercommander.com/centers_ga.shtml

Yeah, I can drive to Atlanta and get the Dyno done, but money is a little tight right now due to x-mas. So in the meantime I was looking for a temp fix. Do you have a link to the VN 1600 page? I don't use yahoo. Thanks Kebo

Phatboy · 11-26-2005

I'll e-mail ya a few maps and just try them out- use the one that runs the best and it will be fine for a while- not ideal fueling, but close enough for the time being. I used a dynojet map until I got dynoed.

Kebo · 11-26-2005

Thanks for the help.....I got the email.

1RAASTA · 11-28-2005

is this a 1600 only map? do you have any for the 1500? thx.

Kebo · 11-29-2005

Quote:

Originally Posted by 1RAASTA

is this a 1600 only map? do you have any for the 1500? thx.

I just noticed that.......since you brought it up. His is a 1600. I guess I will give the Thunder map a try.

11-25-2005	#1 (permalink)
Kebo Cruising In Fourth Gear BTK Intermediate Join Date: Jun 2005 Location: Raleigh, North Carolina Posts: 235	Caddman Mod and PCIII? I already have a PCIII on my bike.....I was wondering if anyone had the Caddman mod installed along with the PCIII? If so, could they send me a copy of their map. I have the parts to do the mod but I am not local to a Dynojet to get the correct mapping. Thanks Kebo __________________ 2003 Vulcan Nomad, V&H Baggers, Harley Trunk, Xenon HID Headlight, Edmunds Lowers

11-26-2005	#2 (permalink)
Phatboy Rides a lazyboy on wheels BTK Expert Join Date: Jun 2004 Location: Virginia Posts: 2,564	My map is on the yahoo VN1600 page. Thunder mfg and powercommander also have some maps availible on their pages. With the money you save w/ caddman you can afford a dyno tune, right Eight tuning centers in Ga http://www.powercommander.com/centers_ga.shtml __________________ Phatboy 04 1600 Classic Black 02 Dodge Cummins

11-26-2005	#4 (permalink)
Phatboy Rides a lazyboy on wheels BTK Expert Join Date: Jun 2004 Location: Virginia Posts: 2,564	I'll e-mail ya a few maps and just try them out- use the one that runs the best and it will be fine for a while- not ideal fueling, but close enough for the time being. I used a dynojet map until I got dynoed. __________________ Phatboy 04 1600 Classic Black 02 Dodge Cummins

11-26-2005	#5 (permalink)
Kebo Cruising In Fourth Gear BTK Intermediate Join Date: Jun 2005 Location: Raleigh, North Carolina Posts: 235	Thanks for the help.....I got the email. __________________ 2003 Vulcan Nomad, V&H Baggers, Harley Trunk, Xenon HID Headlight, Edmunds Lowers

11-28-2005	#6 (permalink)
1RAASTA Third Gear And Gaining BTK Intermediate Join Date: Oct 2004 Location: baldwin hills, cali. Posts: 148	is this a 1600 only map? do you have any for the 1500? thx. __________________ 2003 meanstreak 1500, 69 ss conv. camaro 4 spd. 21ft lavey craft sebring tunnel 280 hp merc. ob with Troy Lee graffics.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)