Mods, mods, and more mods. With pictures. Brake/tailight 42 LED,

plasma blue · 11-01-2007

One of my favorite mods and it's the easiest, 4 minutes.
This is a 42 LED high intensity 100 degree coverage board. It is about 5 times brighter than the stock bulb.

Here are the items I purchased yesterday to put on:

The light cluster is the one on the top left.
I have the clear lens but this will work with any lens.
Remove screw and old bulb. Plug in new cluster base. Route wires on the self adhesive tape like this:

Cut a piece of 3M Foam adhesive and place on wires, sandwiching them:

Now remove liner and stick to reflector. Replace gasket & screw and Ride!

I was truly surprised over the brightness vs. my previous 12 led bulb, this thing GLOWS BRIGHT!

**Spok** · 11-01-2007

are you single handedly supporting the aftermarket industry?

plasma blue · 11-01-2007

No, I think there are 1 or 2 more somewhere.... LOL

**Spok** · 11-01-2007

Quote:

Originally Posted by plasma blue

No, I think there are 1 or 2 more somewhere.... LOL

yeah, but those are your secret identities, i've checked, they all ship to the same address..yours!

busted!

brent4a · 11-01-2007

I have the radiantz LED's all he way around...Brake,front and rear turns. I would be surprised if there is a brighter LED around. I went with cheaper ones the 1st time, wont do that again. I have people ask we why i ride with my brake on because the lights are so bright on the rear, then i hit the brake and they are speechless......and blind.

CheriAnn · 11-01-2007

That is SO COOL!!!!
Honestly, I was just looking at those lights online this morning!!!!!!!
That's it!!!! You've got the EASIEST to follow instructions I ahev ever seen!!!! I'm buying it and installing it on my 900 myself!!!!!

Thank you!!!!!

plasma blue · 11-01-2007

Quote:

Originally Posted by Spok

yeah, but those are your secret identities, i've checked, they all ship to the same address..yours!

busted!

How did you catch me?
I thought I was covering my tracks LOL

plasma blue · 11-01-2007

Quote:

Originally Posted by brent4a

I have the radiantz LED's all he way around...Brake,front and rear turns. I would be surprised if there is a brighter LED around. I went with cheaper ones the 1st time, wont do that again. I have people ask we why i ride with my brake on because the lights are so bright on the rear, then i hit the brake and they are speechless......and blind.

You're right the running lights are much brighter than any brake light and when you hit the brakes... WOW!

plasma blue · 11-01-2007

Quote:

Originally Posted by CheriAnn

That is SO COOL!!!!
Honestly, I was just looking at those lights online this morning!!!!!!!
That's it!!!! You've got the EASIEST to follow instructions I ahev ever seen!!!! I'm buying it and installing it on my 900 myself!!!!!

Thank you!!!!!

All you need is $23, 5 minutes and a small piece of 2 way foam tape!
Good luck Chrei You will be suprized how easy it is and how much better you will be seen, day or night.
MAKE SURE you get the dual intensity one....

**Spok** · 11-01-2007

Quote:

Originally Posted by plasma blue

How did you catch me?
I thought I was covering my tracks LOL

alien technology

plasma blue · 11-01-2007

Quote:

Originally Posted by Spok

alien technology

Next time I order something I will wear my aluminum foil cap!

brent4a · 11-01-2007

Here are mine...With brake OFF

**Spok** · 11-01-2007

Quote:

Originally Posted by plasma blue

Next time I order something I will wear my aluminum foil cap!

won't do no good, we've developed our technologies to break thru that filtering tool...you'll have to go to copper foil to foil us now

CycleDude · 11-01-2007

Quote:

Originally Posted by Spok

won't do no good, we've developed our technologies to break thru that filtering tool...you'll have to go to copper foil to foil us now

Don't listen to him, John.... It's a trick. The aluminum foil still works. He only wants you to switch to copper so he can get the last 3 security digits off of your credit cards!

CycleDude · 11-01-2007

BTW, Great job on the lights!

**Spok** · 11-01-2007

Quote:

Originally Posted by CycleDude

Don't listen to him, John.... It's a trick. The aluminum foil still works. He only wants you to switch to copper so he can get the last 3 security digits off of your credit cards!

note from Spok to Supreme Commander of the 5th Galactic Expeditionary Force

it has come to our attention that a previous adbuctee and probee is in need of a booster treatment

plasma blue · 11-01-2007

Quote:

Originally Posted by CycleDude

Don't listen to him, John.... It's a trick. The aluminum foil still works. He only wants you to switch to copper so he can get the last 3 security digits off of your credit cards!

Darn!!!
I was 1/2 way through epoxying pennies to an old motorcycle helmet!

plasma blue · 11-01-2007

Quote:

Originally Posted by Spok

note from Spok to Supreme Commander of the 5th Galactic Expeditionary Force

it has come to our attention that a previous adbuctee and probee is in need of a booster treatment

Hey Kevin...CYA !! LOL

**Spok** · 11-01-2007

Quote:

Originally Posted by plasma blue

Darn!!!
I was 1/2 way through epoxying pennies to an old motorcycle helmet!

that won't work, the gaps between will allow for signal transfer. unless you put a penny over each opening....but i wasn't the one who told you if anyalien asks...mkay?

CheriAnn · 11-01-2007

So you only did the tailight, right? I was looking at the web site and they mention turn signal bulbs too!!!

11-01-2007	#1 (permalink)
plasma blue Banned BTK Expert Join Date: Jun 2007 Location: Northridge California, ~~its moderific!~ Posts: 1,592	Mods, mods, and more mods. With pictures. Brake/tailight 42 LED, One of my favorite mods and it's the easiest, 4 minutes. This is a 42 LED high intensity 100 degree coverage board. It is about 5 times brighter than the stock bulb. Here are the items I purchased yesterday to put on: The light cluster is the one on the top left. I have the clear lens but this will work with any lens. Remove screw and old bulb. Plug in new cluster base. Route wires on the self adhesive tape like this: Cut a piece of 3M Foam adhesive and place on wires, sandwiching them: Now remove liner and stick to reflector. Replace gasket & screw and Ride! I was truly surprised over the brightness vs. my previous 12 led bulb, this thing GLOWS BRIGHT!

11-01-2007	#2 (permalink)
Spok Whatever Extreme Forum Supporter Join Date: Mar 2004 Location: Mount Vernon, Washington Posts: 33,112	are you single handedly supporting the aftermarket industry? __________________ 2005 V2k Pic Beartooth Kawasaki for all your needs 1-800-556-3098

11-01-2007	#5 (permalink)
brent4a Life Saver BTK Expert Join Date: Feb 2007 Location: Port Republic, Southern Maryland Posts: 315	I have the radiantz LED's all he way around...Brake,front and rear turns. I would be surprised if there is a brighter LED around. I went with cheaper ones the 1st time, wont do that again. I have people ask we why i ride with my brake on because the lights are so bright on the rear, then i hit the brake and they are speechless......and blind. __________________ 04 1600 Classic www.myspace.com/jonesbw http://s100.photobucket.com/albums/m...4a/Motorcycle/ Last edited by brent4a : 11-01-2007 at 10:26 AM. Reason: my bad spelling

11-01-2007	#6 (permalink)
CheriAnn Forum Supporter Forum Supporter Join Date: Apr 2006 Posts: 10,506	That is SO COOL!!!! Honestly, I was just looking at those lights online this morning!!!!!!! That's it!!!! You've got the EASIEST to follow instructions I ahev ever seen!!!! I'm buying it and installing it on my 900 myself!!!!! Thank you!!!!! __________________ 2006 Vulcan 900LT (Mine) 2007 Vulcan Nomad (Hubby's until I decide to take it!)

11-01-2007	#12 (permalink)
brent4a Life Saver BTK Expert Join Date: Feb 2007 Location: Port Republic, Southern Maryland Posts: 315	Here are mine...With brake OFF __________________ 04 1600 Classic www.myspace.com/jonesbw http://s100.photobucket.com/albums/m...4a/Motorcycle/

11-01-2007	#3 (permalink)
plasma blue Banned BTK Expert Join Date: Jun 2007 Location: Northridge California, ~~its moderific!~ Posts: 1,592	No, I think there are 1 or 2 more somewhere.... LOL

11-01-2007	#15 (permalink)
CycleDude Giggity Giggity Goo!!! Forum Supporter Join Date: Mar 2007 Location: North Jersey Posts: 10,562	BTW, Great job on the lights! __________________ *Kevin* *06 VN900* *VROC #27222* My MeanCycles Gallery

11-01-2007	#20 (permalink)
CheriAnn Forum Supporter Forum Supporter Join Date: Apr 2006 Posts: 10,506	So you only did the tailight, right? I was looking at the web site and they mention turn signal bulbs too!!! __________________ 2006 Vulcan 900LT (Mine) 2007 Vulcan Nomad (Hubby's until I decide to take it!)