1500/1600/2000cc - Page 5

*ispeed77* · 10-18-2005

welcome to the forum lifeguard. i personally like the look of the Bub's, but i think they are pretty loud, and i am not familiar with their quality. V&H, however, i am familiar with and would highly recommend.

junkiefred · 10-19-2005

Quote:

Originally Posted by Phatboy

We don't either so we just post pics here now =/

This is going to be my next bike:

Where are the pedals?

*Tod* · 10-19-2005

One can almost see the "Singer" name stamped on that engine.

*trikebubble* · 10-27-2005

Quote:

Originally Posted by Spam

One can almost see the "Singer" name stamped on that engine.

I was thinking Electrolux

**2WheelFun** · 11-05-2005

What engine is that?

1400pilot · 11-06-2005

Quote:

Originally Posted by whistle clean

What engine is that?

internal combustion!!!

**Spok** · 11-06-2005

Quote:

Originally Posted by trikebubble

Hmmm, i'd pick the gray one...But for my 25grand I would at least like to not have turn signals stuck to the bars, and I think someone forgot the radiator.
And they also missed milling holes into the wheels, that'd be fun in a crosswind, and while some like the looks of a $5 camper tailight, I would rather have one from a motorcyle attached to my rear fender. Boy am I perplexed, which one to pick?

I like the red one.

volfaninflorida · 11-17-2005

Hey Ninjagirl. I just registered. Recently bought a '99 Nomad

volfaninflorida · 11-17-2005

Baffled by baffles. ...anybody have any ideas on reinserting baffles in V&H Classic II pipes on my Vulcan Nomad? Rust seems to make it darn near impossible.

*ispeed77* · 11-21-2005

Quote:

Originally Posted by volfaninflorida

Baffled by baffles. ...anybody have any ideas on reinserting baffles in V&H Classic II pipes on my Vulcan Nomad? Rust seems to make it darn near impossible.

wire brush the rust off ?
welcome to the forum, good luck with those baffles.

Saffy · 11-28-2005

I'm looking for the stock HP for vn 2000. I've loked everywhere and can't seem to find it

Xlr8n · 12-01-2005

make a new thread and you should get a quick answer.

*ispeed77* · 12-01-2005

Quote:

Originally Posted by Xlr8n

make a new thread and you should get a quick answer.

good point
post over in the cruiser section and someone should have an answer for you right away

NYcruiser · 12-07-2005

now i find the threads that your building up the post counts... hmm...

v2k stock hp - not enough...

*ispeed77* · 12-07-2005

Quote:

Originally Posted by NYcruiser

now i find the threads that your building up the post counts... hmm...

v2k stock hp - not enough...

ENCHISMATED · 12-14-2005

Is that a Sporster?

*ispeed77* · 12-14-2005

Quote:

Originally Posted by ENCHISMATED

Is that a Sporster?

???? you lost me man.
BTW, welcome to the forum

ENCHISMATED · 12-15-2005

Quote:

Originally Posted by ispeed77

???? you lost me man.
BTW, welcome to the forum

ISPEED77...
I apologize. I was looking at a pic TDAUGHARTY had posted. Ididn't realize the thread had continued. Thanks for the welcome. You'll see me around.

*ispeed77* · 12-15-2005

Quote:

Originally Posted by ENCHISMATED

ISPEED77...
I apologize. I was looking at a pic TDAUGHARTY had posted. Ididn't realize the thread had continued. Thanks for the welcome. You'll see me around.

no prob, enjoy this place, its quite fun

Wild Rice · 03-13-2006

I posted in Main Lobby... about returning to riding after a 20 plus years hiatus. I'm looking at two Vulcans - the 1600 Nomad and 1600 Classic.

Looks like the difference is in the 'trimmings', and if I don't want hard bags, it appears I can outfit the Classic with windshield, sissybar/rack and engine guards for a lot less than the cost for the Nomad.

Any thoughts???? Oh.. I was also looking at Suzuki's New M109R, which will probably be named Cruiser of the Year... but my local dealer is definitely a Kawa bigot... and swears by them.

Thanks. Irv

10-18-2005	#81 (permalink)
ispeed77 RIP Deron Harden :-( Extreme Forum Supporter Join Date: Sep 2004 Location: Gardner, MA Posts: 32,533	welcome to the forum lifeguard. i personally like the look of the Bub's, but i think they are pretty loud, and i am not familiar with their quality. V&H, however, i am familiar with and would highly recommend. __________________ David - Moderator 2002 Suzuki DRZ400 2003 1500 Meanie, scraping pipes and frame :-) In loving memory of Deron Harden, forever in our thoughts :-(

10-19-2005	#83 (permalink)
Tod I yam what I yam Extreme Forum Supporter Join Date: Aug 2005 Location: Round Rock, TX Posts: 21,990	One can almost see the "Singer" name stamped on that engine. __________________ “Saying what we think gives us a wider conversational range than saying what we know.” - Cullen Hightower

11-05-2005	#85 (permalink)
2WheelFun the "fun" guy Extreme Forum Supporter Join Date: Nov 2004 Location: Albion, Washington "Pacific Northwest" Posts: 32,674	What engine is that? __________________ *KING KAHUNA* *2007 V2K LT* ****PICS** 2007 Brute Force 650i **PICS** I love the smell of SeaFoam in the morning**

12-01-2005	#92 (permalink)
Xlr8n Living on the dark side Forum Supporter Join Date: Aug 2005 Location: midwest Posts: 2,541	make a new thread and you should get a quick answer. __________________ '03 1200 Sporty

12-07-2005	#94 (permalink)
NYcruiser Red Lodge Approved BTK Expert Join Date: Feb 2005 Location: Upstate NY - boonies Posts: 1,731	now i find the threads that your building up the post counts... hmm... v2k stock hp - not enough... __________________ Ian 2005 Kawasaki V2K - Black I wouldnt trust a man that didnt try to steal a little...

11-17-2005	#88 (permalink)
volfaninflorida Newbie Join Date: Nov 2005 Posts: 2	Hey Ninjagirl. I just registered. Recently bought a '99 Nomad

11-17-2005	#89 (permalink)
volfaninflorida Newbie Join Date: Nov 2005 Posts: 2	Baffled by baffles. ...anybody have any ideas on reinserting baffles in V&H Classic II pipes on my Vulcan Nomad? Rust seems to make it darn near impossible.

11-28-2005	#91 (permalink)
Saffy Still On The Kickstand Join Date: Oct 2005 Location: brisbane, australia Posts: 33	I'm looking for the stock HP for vn 2000. I've loked everywhere and can't seem to find it

12-14-2005	#96 (permalink)
ENCHISMATED Newbie Join Date: Dec 2005 Location: Durham, NC Posts: 2	Is that a Sporster?

03-13-2006	#100 (permalink)
Wild Rice ATFAB BTK Beginner Join Date: Mar 2006 Location: S.E. Mass Posts: 98	1600 Nomad or Classic? I posted in Main Lobby... about returning to riding after a 20 plus years hiatus. I'm looking at two Vulcans - the 1600 Nomad and 1600 Classic. Looks like the difference is in the 'trimmings', and if I don't want hard bags, it appears I can outfit the Classic with windshield, sissybar/rack and engine guards for a lot less than the cost for the Nomad. Any thoughts???? Oh.. I was also looking at Suzuki's New M109R, which will probably be named Cruiser of the Year... but my local dealer is definitely a Kawa bigot... and swears by them. Thanks. Irv __________________ VROC #22261 http://www.CruiserCustomizing.com/FranklinBiker

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
Jon Carlson