A forum for talk about Kawasaki's line of cruisers.
Thought it was time we had a topic thread for the boys on the Drifters.
Welcome guys, sorry we didn't do this earlier.
This Sticky is for specific questions, concerns and feedback pertaining to the the Vulcan 500, 750 and 800 Models.
This Sticky is for specific questions, concerns and feedback pertaining to the the Vulcan 1500, 1600 and 2000 Models.
This thread was created to consolidate and share information on this seemingly common issue. Please feel free to add any pertinant information, or pictures and schematics that may help other Vulcan riders find and repair these coolant leaks.
It seems apparant that many Vulcan cruisers have...
Just a reminder that this is happening in July.
We already started planning the BTK East Coast ride. Go to this thread for details.
Please note that that any online "free .pdf copies" of authorized Kawasaki Service Manuals violate copyright infringement.
Please refrain from posting any copies, or links to any sites that host free copies of any Kawasaki Service Manuals on this forum. Doing so could result in legal action...
Ladies & Gentlemen,
Although these are Kawasaki foruns owned & operated by Beartooth Kawasaki, many of our members also own other brands of motorcycles including Harley Davidsons. Civil & constructive discussions comparing bike brands, features, etc. can be educational for all interested & are...
Often questions are brought up about threads being deleted or members being banned by the Moderators or Administration. We hope this thread will help those with questions to understand the process.
Deletion of threads/posts:
As a general rule we donít delete threads w/o cause. If a posted...
I have a Vulcan 900 classic LT and was wondering which was the best to lessen the vibration at highway speeds:
1)Front pulley fix or
2)200 Rear tire install
Installed risers and a throttle lock on my bike (vulcan 900). Now my bike will not start in 1st gear (but it will in neutral)? The cables may have stretched (fixed this by re-routing cables). My Ignition box was apart during the throttle install. During the riser install and after I turned the...
I'm going to bring my camera with me .so I can show some none riding people at work what they are missing out on.Two of the people at work just got there motorcycle license.and they do not own a motorcycle.They need to see pictures of a bike ride to help them get bike sooner .I ride by myself...
I have been looking into the redneck intake mod and I was wondering how many have done it, and what you think. And just to make sure I've got it right some are cutting a couple 1" holes in the front of the air box and some are just removing the entire back of the box between the cylinders. Is that...
Ive been looking at chaps and full leathers and also padded denims. Looks like full leather pants probaby are best but i would like to hear what others have.
Is anyone aware if there are chrome fender accessories (rails, caps, tips) available for the new Voyagers?
I posted this in the Mechanic's Corner and didn't get a response.
I have a weird "fluttering" sound on acceleration. Bike runs just fine, but the noise is there. Checked to make sure nothing was loose on the bike, thought maybe it was a loose heat shield or something.
Could this be the...
Took it to a dealer that was recommended to me. Didn't want to do that originally because of the cost but didn't have a good shop and needed to get it done before heading to NC. They did a good job and the bike seems to be running better. I think that is because they adjusted the idle.
Ive wanted the side mount for a while now, so i finally went out to the shed and measured up some stuff. Found a threaded bolt hole on the left side swing arm and believe it or not, found a bolt that had the right threads.:-o
so i ran the bolt in carefully, making sure to pull it back out...
Well, my Brother and I just completed a five day 1031 mile round trip throught Yellowstone National Park and back and what a trip it was. We tent camped all but the final night when we were tired of putting up, tearing down and packing up all our gear.. I am pleased to say the 900 ran like a...
Got a set of Chucksters 2" risers for my '05 Vulcan 800 Classic on the way and need a little advice.
#1 Do the Allen bolts holding down the bars take an 8mm wrench?
#2 Does anyone know the torque value for those bolts as the Clymer does not list them?
#3 Looks like the clutch cable is gonna...
need to replace those stock tires of the custom.
07 VN 900 custom.
found a couple of brand online superstore website
Shinko 230 tour Master $150
Anyone have this system?
Motorcycle / yacht 2 speakers + amplifier + radio pkg (http://www.gooddeals18.com/product/SHKCYCLERADIOKIT/Motorcycle__yacht_2_speakers__amplifier__radio_pkg.html)
I just completed a 3-day loop, Google Maps says 940 miles.
I think the tire is done. Going for the Metz 200/70-15 for the next one. Just ordered it.
Boy! That last few millimeters went fast!
or is it the corn with our ethanol mix that is killing our bikes' performance? I added a couple of ounces of injector cleaner in my 900 and took off on a 40 mile ride. I hardly recognized my bike as the performance was that much different with a heavy throttle hand and I only heard one decel or...
I received my monthly magazine from my motoring organisation today. The star letter (got a free dab radio) on the letters page was complaining about motorcycle accidents. Saying that like car drivers bikers should pay more money for their bikes so that they can be fitted with safety devices to...
Hello everyone. I am new to the site and picked up my 900 Custom SE last week. As soon as I saw it I had to have it. Has anyone upgraded their seat to a gel comfort one. If so, which brand would you reccommend? The Kawasaki one doesn't seem bad for $204.00
Ha ha ha,
I've turned to instigator. Let's instigate here.
Just tell us what your favorite Harley is.
Feel free to give us information such as:
Looking at a product from Cruiser Customizing. Anyone have any ordering experience with them. Good or bad. or can Beartooth Kawi get the same parts and ship to Canada?
I'm looking for a fender rail.Twin rail design by Showchrome.
Thanks for any info.
There are currently 79 users browsing this forum. (3 members & 76 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.