Your never too old to play in the dirt!
If you prefer to ride your Kawasaki offroad, This is the forum for you!
Spanky's Jetting Guide:
A correctly jetted carb makes a tremendous difference in the torque, midrange pull, top-end pull, and over-rev of your engine. If you have never jetted your bike correctly, you will almost certainly gain some performance at some point in the bike's powerband.
Often questions are brought up about threads being deleted or members being banned by the Moderators or Administration. We hope this thread will help those with questions to understand the process.
Deletion of threads/posts:
As a general rule we donít delete threads w/o cause. If a posted...
Hi, newbie here.
Just finished my sons kx250.
Well here it goes..
BRAND NEW REBUILD!!
PREVIOUS OWNER HAD BRAND NEW (I HAVE RECIEPTS!!)
New Hot Rods Crank
Sorry I tried to use the search feature but it wouldn't work for me, not sure whats wrong??
I'm looking for lowering links for my wife's 2000 KX125 but I'm having real trouble finding any. It seems like a lot of manufacturers don't make them for that model.
Can anyone hep me out...
Didnt really smoke too bad when it was running...Air filter was dirty as hell, cleaned and oiled with Maxima air filter cleaner and oil. I was running a 32:1 mixture of ethanol free 93 and maxima castor 927 oil and switched to 40:1. Started bike...let it stall to get gloves on and when I tried to...
Hi there its been a while since i last posted here i am back with a KX250 but i have a slight problem trying to identify what year this bike i know its between the 95-98 range, the vin number looks like this KX250K-017143, all the sites iv tried say its invalid and my engine number looks like this...
Wondering if anyone knows if a 1990 kx125 head will fit and work on a 1988 bottom end?
Where can I find an 89 kx80 carb?!!! Doesn't need to be new can even be a knockoff brand just needs to work
Hello, I have a kx80 that I though was a 1984 but, the engines air cooled! So it can't even be a Kx80 engine even though I am positive that I have a kx80 chasis but I am not even 100% on the year of that. Could you possibly tell me the year of my bike and the year and model of the engine?
Hello I am new to the forum and I did some searching before just coming out and posting this...
I just purchased a 2000 KX80 on New Years Eve.. I am pretty new to riding 5'2 20yrs old.. I only weigh 128lbs so this bike takes off with me on it.
I have read that the KX80 can be bored up to...
I'm working on a 2000 KX250 that needs a new rear shock and gas tank...Wondering if anyone can help me out and tell me what other years will cross over for both parts...Thanks
Can someone tell me where I can find a holder Valve part #12023-1014 it goes between the carb and reed valve. Kawasaki doesnt make them anymore. Is there a holder valve from another bike that would fit?
MotoXpro are delighted to announce the 2013 motocross team as Chris Barber, Tai Elvin-Andrews, Bayliss Utting and of course, Team Manager Chris Endean competing in championships across East Anglia and the UK.
2012 saw the teamís first competitive year in local motocross championships with riders...
Hello! I'm looking around to see if I can get better plastics for my 2006 KLX-125. I haven't found any but some people say that the Suzuki DRZ-125 will fit the kawasaki's. Is that true? If so, can you send me the link! Also want to make my bike a little quicker and faster. Best exhaust and...
So i dont know if the questions i asked in my other posts were stuupid or what. I always see a response a few hours after posting. No answers yet. I had asked if it was possible to get different colored plastics for a 2003 klx 125. I noticed that suzuki makes a similar bike. A ddr 125, or something...
As the title reads, already figured on the K&N Filter, New grips and Moose skid. Also have a full FMF pipe. What else can I do to make this thing better?
I am restoring my 1999 KX 250.
My question is can I install a newer set of forks up front ?? I really like the 07 and 08s look of them. but what do I have to do??? I have to rebuild what ever I get to my weight anyway.
I have herd people doing this. But I havent really found out what they...
Hey we bought a kx 125 and cant figure out the engine year model i know the frame is 1987 so I ordered a piston for a 1987 but it is to long and hits the crank so can anyone tell how to ID the year of the engine Thanks
hi everyone i have just got a kx60 and Im having some trouble with it first thing is when i put it in gear the rev dies down and when i try to set off it bogs down and i have to rev it quite a bit for it to go otherwise it will cut out and the 2nd thing is there are some gear markings on the casing...
Wondering if they would match up? Found a front end with inverted that are very nice for $100
This is my trusty 88 KX 125. Just found this site and joined today. Very cool place
There are currently 35 users browsing this forum. (0 members & 35 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.