Your never too old to play in the dirt!
If you prefer to ride your Kawasaki offroad, This is the forum for you!
Spanky's Jetting Guide:
A correctly jetted carb makes a tremendous difference in the torque, midrange pull, top-end pull, and over-rev of your engine. If you have never jetted your bike correctly, you will almost certainly gain some performance at some point in the bike's powerband.
Often questions are brought up about threads being deleted or members being banned by the Moderators or Administration. We hope this thread will help those with questions to understand the process.
Deletion of threads/posts:
As a general rule we donít delete threads w/o cause. If a posted...
I think the bottem end has gone in my kx 85 am i best to get a full crank kit ? of just the parts it needs i dont think it has ever been changed if so witch make is best to buy ? i'm just new to all this stuff also witch site is best to buy OEM parts?
Looking into a 1999 KLX300, from pics looks to be decent. Anything I should look for in person?
I just bought a KX 500. I think it's a 1993. I want to confirm this.
The Vin# is JKAKXVE12PA009333
The Engine # is KX500BE016769
Can anyone here help me with this please?
please help kawasaki gurus,
I bought from my brother what I thought was a factory 1993 KX100, however I`m looking a giving it a freshen up and am not so sure now. The frame number is KX080P-000644 and the engine number is KX080FE013310 ( indicating kx80), however the barrel has .99L stamped into...
hey i just bought a kdx175 from a guy that says it sat in the barn for years and he got it out and started it with very little problems. they rode it for a while (dont know if he meant hours or days) and one time they parked it and it never would start after that. it has sat for around 3 years...
I NEED TO KNOW WHAT YR MY SONS KX 65 IS.
IVE TRYED TO DECODE THE VIN AND ITS COMMING BACK AS 1980
WHICH IS IMPOSSIBLE.
IM SURE SOME ONE OUT THERE DOES HAVE THE KNOWLEDGE TO DECODE IT AND LET ME KNOW PLEASE. AS I NEED TO BUY PARTS ETC.
HERES THE VIN;JKBKX065AAA020279
Hey everyone, i just got a 85 kx 125. when i first got it it had small blue spark, but it isnt consistant. i messed with the magneto, and now it gets no spark. it got wet inside, and im unsure how to clean it out, and i also dont know how to check the cdi, coil, or mag ohms. i need to know what...
New to the forum!
My sons KX60 recently packed up, crank bearings imploded. I've replaced them, along with a general bottom end rebuild.
I've put the engine back in the bike, hooked it all up. The engine starts fine, runs smoothly but I'm having real problems getting it to change...
I'm about to buy this bike in about 3 hours and i would like to know could it just be so low compression that it slipps completely? plz reply asap he said it had low low compression
First off, HI gang. Ive been searching this site for 3 weeks now, awesome info.
HOWEVER, I cant find any leads on this bike.
I have a 91 kx 125, it was running like a singer sewing machine on steriods. Unfortunately, after 2 laps, i came into the barn and and it just stalled. It wont start. Ive...
My boy has an 01 kx65, that locked up the piston today. I already had a weisco piston on the way since I bought the bike this past spring and dont know the history, so i have all the stuff to go thru the entire engine to make it the way i want it anyway. But since the piston locked up on me now, i...
i have a 1992 model and was wondering if i could fit a later models forks on mine? find them really soft even with rebuild etc plus i dont like that blue affect! :)
have not got frame tag so need to now if any one can date this for me engine num KX100AE000898 with thanks mark:confused:
Hello all :)
I hope somone could help me with this problem..
I bought a new bike some months ago, and the seller told me that its Kawasaki kx 250 2001..
Now I started to search for it on net, and I couldnt find a shi* about it, what year is it -.-
Looked the VIN and engine code also..those...
yes, you read it right...I want to fit my old blown up KX250 into my grandmas Prius, it was her idea...I figure if I just take the wheels off it will fit, but Im wondering...what is the length between the forks, and end of the swing arm, and height between the swing arm and the fender.
I wanted to see if I could get a helping hand on this issue. The other my son was Riding his 65 on the track . He was ridding for a while with no issues took a break and then took off and we heard a big bang and the bike died. I took the opened off and it turns out that...
HI IM NEW TO THIS AND IVE JUST JOIN THE GROUP I NEED TO FIND OUT WHAT YEAR MY BIKE IS IT A KX 80 I CAN ONLY FIND THE CODE ON THE SIDE AND NOT ON THE ENGINE I WILL BE ADDIN PICS SO PLEASE GIVE ME TIME BUT THE CODE ON THE STREEING IS
sorry guys, hello to everyone (from Italy), I am very passionate about bikes, but many times I have problems with spare parts.
I bought (used) a Kawasaki Kx 125 with this chassis number KX125E008893
You know tell me how do I know what year is this bike?
I looked next to the lever set in...
Hi guys, I m apologize in advance for my bad english, I have a 1987 Kawasaki kx 125 years in the U.S. and I bought this bike carb (Mikuni VM 35), but I do not know the original setting of the carburetor. ... some of you could help me??
I want to know:
1) Minimum jet;
2) Main jet;
I am looking for a new crank for my 96 kx125 (2 stroke) and I am wondering will a crank for a 03 kx125 (2 stroke) work on the 1996 ?
There are currently 53 users browsing this forum. (0 members & 53 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.