Silly fuel pump question

Santos · 06-22-2005

Wasn't sure if i should post it here or in the sticky.. newbs like me are allowed to fumble for the first few post right?

What i wanted to know:

Is the fuel Pump off a ZX6 is the same/interchangeble with a ZX10 / ZX11?

It would make my life easier if they where, the pics i could find on ebay look similar

Green Knight · 06-22-2005

Best thing I could say is ask a dealer if they are... I'm not sure myself...

zx10tod · 06-23-2005

You can check part numbers on Kawasaki's website and compare the two.

http://www.buykawasaki.com/Default.a...D=2&intParts=1

Santos · 06-23-2005

zx10tod

I went on the site and the part number for a ZX6R and a ZX11R where both 49040

The last digits where different (49040-1057, 49040-1061) but the both diagrams did not list the last 4 digits and they had a different set of parts (hose/filter etc)

Now i need to get some data on PSI, Flow rate and Amp draw

-santos

zx10tod · 06-23-2005

The part number in the list is the one you want. I believe the one in the diagram is just a group number. It's the same for a lot of years. The pump for my 1988 ZX10 is not compatible with others that had the same first 5 digits. Mine's 4 wire, most others are 2.

Santos · 06-24-2005

The wire or plug shape isn't the problem... that i can change i just need to know if they have the same flow rating and PSI

06-22-2005	#1 (permalink)
Santos Newbie Join Date: Jun 2005 Posts: 4	Silly fuel pump question Wasn't sure if i should post it here or in the sticky.. newbs like me are allowed to fumble for the first few post right? What i wanted to know: Is the fuel Pump off a ZX6 is the same/interchangeble with a ZX10 / ZX11? It would make my life easier if they where, the pics i could find on ebay look similar __________________ -Santos ;-)

06-23-2005	#3 (permalink)
zx10tod Sit speling cheker BTK Expert Join Date: Mar 2005 Location: Idaho Posts: 435	You can check part numbers on Kawasaki's website and compare the two. http://www.buykawasaki.com/Default.a...D=2&intParts=1 __________________ 1988 ZX10, Vance & Hines SS2R exhaust, stage 3 jet kit, K&N filters. Like I needed another project!

06-23-2005	#4 (permalink)
Santos Newbie Join Date: Jun 2005 Posts: 4	zx10tod I went on the site and the part number for a ZX6R and a ZX11R where both 49040 The last digits where different (49040-1057, 49040-1061) but the both diagrams did not list the last 4 digits and they had a different set of parts (hose/filter etc) Now i need to get some data on PSI, Flow rate and Amp draw -santos __________________ -Santos ;-)

06-23-2005	#5 (permalink)
zx10tod Sit speling cheker BTK Expert Join Date: Mar 2005 Location: Idaho Posts: 435	The part number in the list is the one you want. I believe the one in the diagram is just a group number. It's the same for a lot of years. The pump for my 1988 ZX10 is not compatible with others that had the same first 5 digits. Mine's 4 wire, most others are 2. __________________ 1988 ZX10, Vance & Hines SS2R exhaust, stage 3 jet kit, K&N filters. Like I needed another project!

06-24-2005	#6 (permalink)
Santos Newbie Join Date: Jun 2005 Posts: 4	The wire or plug shape isn't the problem... that i can change i just need to know if they have the same flow rating and PSI __________________ -Santos ;-)

06-22-2005	#2 (permalink)
Green Knight Banned BTK Expert Join Date: Aug 2004 Location: Mason City, IA Posts: 1,803	Best thing I could say is ask a dealer if they are... I'm not sure myself...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)