|
|
|
|
|||||||
| Click here to see some of our favorite links! |
|
|
 |
|
|
LinkBack | Thread Tools |
03-30-2007
|
#1 (permalink) |
|
Newbie
Join Date: Mar 2007
Posts: 2
|
1994 B ZX-9 Factory Pro Jet settings?? Help
Hi all,
I have a 1994 B ZX-9 and purchased a factory pro 1.7 Kit for it... Installed it and set it to the recomended settings and have problems between 2-3.5 K... during roll-on acceleration and tip-in throttle ... but WOT from a dead stop... everything is fine... Before I take everything apart and dial the settings in... I wanted to share my settings and maybe get others to share theirs so that I can minimize the number of times I have to take the carbs apart. Header Pipe: Stock Muffler: Yoshimura slip on Advancer: Factory pro +4 degrees Needle position: 3.5 (from the top) on all 4 needles Fuel screws are 2.75 turns out Main Jets: 195/205 stagger (2 cylinders at 195 2 at 205) Thanks in advance! |
|
|
| The Motorcycle Network |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Jet Kit Info | diablo13346 | Kawasaki Streetbikes/Sportbikes | 7 | 07-25-2006 01:13 PM |
| Jet Settings | Nutmeg | Kawasaki ATV and Mule | 0 | 06-19-2006 03:52 PM |
| need pilot jet... | ratfink | The Mechanics Corner | 1 | 05-03-2006 12:12 AM |
| Correct jet size and settings | DeathTrap | The Mechanics Corner | 1 | 02-02-2005 08:53 PM |
| 2001 ZX9R- factory suspention settings | hooliganx1 | The Mechanics Corner | 3 | 02-04-2004 03:57 PM |
