1000cc - 1400cc - Page 2

Dawson-ZX-11 · 07-06-2005

well....looks like I'm gonna try to find a new 12R around here somewhere....might just have to have a dealership order me one.....

zx10r · 07-28-2005

hey everyone im new here so figured i would say hy and show yall my lil bike

Lpham_3 · 08-23-2005

just bought a 96 zx-11 as first bike, hope this baby treats me good!

Teddy Bear · 08-24-2005

well all i have to say.........i've owned 6 kawasaki ninjas by far.........the zx10r.........BEST BIKE ever

bdcrow00 · 09-16-2005

Quote:

Originally Posted by Dawson-ZX-11

ok, thanks guys......like I said, the new (05) ZX-10R I sat on was terrible as far as comfort.....it was a little too narrow for me as well....my knees stuck up to the edge of the gas tank....that gives me room to believe the zx-9R would be similar (as far as stance, seat height/padding, width, etc.)....maybe I'll try to find a newer ZX-11....any other comments are appreciated!!!

I had the same problem with the 10R. Luckily, I discovered the Z1000 had a more comfortable, upright position. It got even better with bar risers! Look around if you haven't tried one - great deals (on leftover new 03s and 04s) are to be had (there's two in my neighborhood).

BC

TheJas · 10-02-2005

Should this be upped to 1400cc now that Kawasaki's coming out with a 1350cc sportbike? =)

zedx11 · 10-03-2005

zxstealth · 10-26-2005

hi im new i have a zx10r 05 and @ 4000-5000rpm the fairing vibrates is this normal. also im short @ can barely touch the ground can it be lowered @ will it hamper handling

darkclarity · 03-01-2006

If you can find one, check out a GPZ1100/ZX1100E (mid 90's, only made for about 3 years). These things aren't all out sportbikes, but when it comes to stompin' power, it's ALL there!

GPz1100/zx1100e is my baby.
http://static.flickr.com/42/10194854...2ae0f7.jpg?v=0

kawasaki zx10r · 03-18-2006

I installed the tre like the instrucyions say and it works but my F1 warning light flashes? What did I do wrong or forget to do?

kawasaki zx10r · 03-18-2006

I installed the tre and the F1 light flashes? any advise on anything with the cause of it?

Chrisrip · 04-20-2006

I just recently bought a 1988 zx-10 that is about ready to run, so i was wondering if anybody has one and has reached its maximum speed. If you have can you please tell me what you have reached so i can have an idea of what speed it tops out. and what are some good mods to do to it.

#1stunner · 04-25-2006

new guy here, i got a 05 zx10r,great wheelie bike,i wouldnt trade it for anything.I havent found a better bike

#1stunner · 04-25-2006

I got a 05 zx10r fully custom,my fairings vibrate to. no big deal,just annoying.dont really pay to much attention to them doing 130 everywhere

Kwak · 05-01-2006

what about the kawasaki ZZR1400 "wow sign me up, i want one"

fearsome · 05-13-2006

I'm new to the list (waves to everyone). I am rebuilding an '01 ZR1200 and was wondering if anyone knows if there is a group that focuses on this model like they do for so many others? I haven't been able to find it if it does. I am also interseted to know how simular it is to the ZZR1200.
Thanks.

Darkgreen_Flash · 05-14-2006

I reply to your question,Get yourself a good pipe and a jet kit kit to compliment it. It my be a good idea to have someone with the proper vac gagues to set the carbs. Enjoy.....

zedx11 · 05-14-2006

Quote:

Originally Posted by #1stunner

I got a 05 zx10r fully custom,my fairings vibrate to. no big deal,just annoying.dont really pay to much attention to them doing 130 everywhere

the buzz on mine is from the throttle cables against the brake master cylender resivoir.

RED MEAT · 05-18-2006

I need more mods or different settings. I need about a second better on my time!! what do I do? Any suggestions?

ninja636billy · 05-18-2006

Quote:

Originally Posted by RED MEAT

I need more mods or different settings. I need about a second better on my time!! what do I do? Any suggestions?

there are generally 3 ways to get faster

1. become a better rider
2. get a better power to weight ratio
3. better grip/suspension set-up

07-28-2005	#22 (permalink)
zx10r Newbie Join Date: Jul 2005 Posts: 11	hey everyone im new here so figured i would say hy and show yall my lil bike Attached Thumbnails

08-24-2005	#24 (permalink)
Teddy Bear Newbie Join Date: Aug 2005 Location: Norwalk,CT Posts: 9	well all i have to say.........i've owned 6 kawasaki ninjas by far.........the zx10r.........BEST BIKE ever __________________ ZX 10R THE ONLY WAY TO LIVE IS UP ON ONE..........

10-03-2005	#27 (permalink)
zedx11 yellow doesn't corner wel Extreme Forum Supporter Join Date: Oct 2005 Location: KC, KS Posts: 21,335	__________________ Darrell Ignorance is a disease my friend. You should rid yourself of it. Last edited by zedx11 : 10-12-2005 at 08:45 PM.

03-18-2006	#30 (permalink)
kawasaki zx10r Newbie Join Date: Mar 2006 Posts: 2	Need Help with Installation of TRE. I installed the tre like the instrucyions say and it works but my F1 warning light flashes? What did I do wrong or forget to do?

03-18-2006	#31 (permalink)
kawasaki zx10r Newbie Join Date: Mar 2006 Posts: 2	Need help with installation of tre I installed the tre and the F1 light flashes? any advise on anything with the cause of it?

07-06-2005	#21 (permalink)
Dawson-ZX-11 Still On The Kickstand Join Date: Jun 2005 Location: Southern Illinois Posts: 25	well....looks like I'm gonna try to find a new 12R around here somewhere....might just have to have a dealership order me one.....

08-23-2005	#23 (permalink)
Lpham_3 Newbie Join Date: Aug 2005 Location: Los Angeles Posts: 9	just bought a 96 zx-11 as first bike, hope this baby treats me good!

10-02-2005	#26 (permalink)
TheJas Finally Got Into First Gear BTK Beginner Join Date: Jul 2005 Location: San Jose, CA Posts: 60	Should this be upped to 1400cc now that Kawasaki's coming out with a 1350cc sportbike? =)

10-26-2005	#28 (permalink)
zxstealth Newbie Join Date: Oct 2005 Posts: 11	hi im new i have a zx10r 05 and @ 4000-5000rpm the fairing vibrates is this normal. also im short @ can barely touch the ground can it be lowered @ will it hamper handling

03-01-2006	#29 (permalink)
darkclarity Newbie Join Date: Mar 2006 Location: N.E.Ohio Posts: 1	If you can find one, check out a GPZ1100/ZX1100E (mid 90's, only made for about 3 years). These things aren't all out sportbikes, but when it comes to stompin' power, it's ALL there! GPz1100/zx1100e is my baby. http://static.flickr.com/42/10194854...2ae0f7.jpg?v=0

04-20-2006	#32 (permalink)
Chrisrip Do it your selfer Join Date: Jan 2006 Location: Arizona Posts: 9	I just recently bought a 1988 zx-10 that is about ready to run, so i was wondering if anybody has one and has reached its maximum speed. If you have can you please tell me what you have reached so i can have an idea of what speed it tops out. and what are some good mods to do to it.

04-25-2006	#33 (permalink)
#1stunner Newbie Join Date: Apr 2006 Location: I live on south mountain,in p.a Posts: 20	new guy here, i got a 05 zx10r,great wheelie bike,i wouldnt trade it for anything.I havent found a better bike

04-25-2006	#34 (permalink)
#1stunner Newbie Join Date: Apr 2006 Location: I live on south mountain,in p.a Posts: 20	I got a 05 zx10r fully custom,my fairings vibrate to. no big deal,just annoying.dont really pay to much attention to them doing 130 everywhere

05-01-2006	#35 (permalink)
Kwak Newbie Join Date: Apr 2006 Posts: 3	what about the kawasaki ZZR1400 "wow sign me up, i want one"

05-13-2006	#36 (permalink)
fearsome Newbie Join Date: May 2006 Location: Tulsa, Oklahoma Posts: 6	I'm new to the list (waves to everyone). I am rebuilding an '01 ZR1200 and was wondering if anyone knows if there is a group that focuses on this model like they do for so many others? I haven't been able to find it if it does. I am also interseted to know how simular it is to the ZZR1200. Thanks. __________________ Burning up the road for a new day! Last edited by fearsome : 05-13-2006 at 05:02 PM.

05-14-2006	#37 (permalink)
Darkgreen_Flash Darkgreen_Flash Join Date: May 2006 Location: Ontario,Canada Posts: 2	Zx 10 I reply to your question,Get yourself a good pipe and a jet kit kit to compliment it. It my be a good idea to have someone with the proper vac gagues to set the carbs. Enjoy.....

05-18-2006	#39 (permalink)
RED MEAT GO!!! Join Date: May 2006 Location: paducah , kentucky Posts: 5	I need more mods or different settings. I need about a second better on my time!! what do I do? Any suggestions?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New riders and literbikes	Freakinout	Kawasaki Streetbikes/Sportbikes	173	06-06-2008 12:40 AM