top dead center? - Page 2

97tjtom · 10-28-2008

seafoam fouled my plugs.

i pulled all 4, cleaned them, and put them back in. problem solved.

but at least now im an expert at doing valve jobs

zedx11 · 10-28-2008

Quote:

Originally Posted by 97tjtom

it was running fine before i did the valve job, only reason i adjusted them was because it was at 12k and it was tapping. after the adjustment she ran beautifully except for a slight hesitation from idle but she had full power. last thing done before it started running bad was the seafoam. runs like its running out of gas. but i have plenty in the tank and she runs fine under 1/4 throttle.

did you check the timing chain adjuster?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ran battery dead, now electrical problems.	chrishoward1	Kawasaki Cruisers	13	03-28-2009 04:46 AM
84-88 GPZ 900 center stand	Fredvs79	Vintage Motorcyle Info	2	07-25-2008 10:40 AM
Man shot dead for bad singing in Philippine karaoke bar	Bad Company	Off Topic	4	06-03-2007 01:36 AM
timing a klf300 at top dead center,,,??	beepco	Main Lobby	0	10-07-2006 08:27 PM
'87 454 - What hose goes on top tee between carbs?	bill buttermore	Kawasaki Streetbikes/Sportbikes	2	09-08-2006 09:44 AM

10-28-2008	#21 (permalink)
97tjtom Still On The Kickstand Join Date: Jun 2008 Posts: 30	seafoam fouled my plugs. i pulled all 4, cleaned them, and put them back in. problem solved. but at least now im an expert at doing valve jobs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)