A forum dedicated to Kawasaki Streetbikes and Sportbikes.
This Sticky is for specific questions, concerns and feedback pertaining to the: Ninja ZX-6RR Ninja ZX-6R ZZR-600 750S ZX9R (?)
This Sticky is for specific questions, concerns and feedback pertaining to the Ninja 250R and 500R.
This Sticky is for specific questions, concerns and feedback pertaining to the following Sportbike Models: Ninja 10R Ninja 12R Z1000 ZX1100 ZZR 1200 ZRX1200R Concours
Just a reminder that this is happening in July. http://www.kawasakimotorcycle.org/forum/rides-events-rallies/149531-official-btk-east-coast-forum-ride-july-25-2013-july-28-2013-a.html
***warning!! this thread is addicting and also some music may not be sutable for work ethic's***** now onto the fun.. Judgement day (http://video.google.com/videoplay?docid=-5844202458146221973&q=JUDGEMENT+DAY) Biker Dancing My Humps...
Follow the linkie. http://www.kawasakimotorcycle.org/forum/main-lobby/134747-so-you-want-buy-sportbike-your-first-bike-have-questions.html
Please note that that any online "free .pdf copies" of authorized Kawasaki Service Manuals violate copyright infringement. Please refrain from posting any copies, or links to any sites that host free copies of any Kawasaki Service Manuals on this forum. Doing so could result in legal action...
Often questions are brought up about threads being deleted or members being banned by the Moderators or Administration. We hope this thread will help those with questions to understand the process. Deletion of threads/posts: As a general rule we don’t delete threads w/o cause. If a posted...
I have a 92 ninja 600R C model. It runs fine at idle and under 6000rpm when hot. When its cold or not up to temp its ok. but when its up to temp at around 6000 rpm it will kinda choke on itself. everything is stock. I adjusted the mix screws to 2 turns out from seat and floats are set to 16.5mm i...
I can't get a straight answer anywhere... anyone know? I need literally all the plastics for my bike and have nearly a full set from a 96 ZX9; but have no idea if they fit or I'm missing brackets or what. Sigh.
Ive completely stripped the bike and located the stator. I have the stator cover off, but from here i get completely lost and clueless for some reason....can someone help me on how to replace the stator? thanks
Hi all, I'm dumbfounded on this one. I have the service manual and parts manual for this 1990 zx750 and neither helps me. So here it goes. I just put pods on my 90 zx750. This bike is a CA bike (I live in WA) so it had the darn emission system gizzmo's originally put on it. There is an...
Hi Is there someone who can help me with the Part number as the headlight on z750 naked (not z750S) 2006 mod ?? Have called several dealers but they all give different part number .. Have z750 naked and z1000 naked same headlight ? z750 naked and z750 S have different headlight.
Freestyle Ingenuity / F I Cages.com - Sliders (http://www.freestyleingenuity.com/site/index.php?option=com_content&task=view&id=9&Itemid=20) Freestyle Ingenuity extended frame sliders Got my hands on a set of them today for my 2006 ZX-10r that were suppose to be back-ordered until July 29th....
i was told my bike sounds louder than normal while ridin and maybe i needed to have my valves adjusted, i dont remember evr havin thm adjusted before and im approaching 16,000 miles so its possible,has anyone had their valves adjusted recently and why and does the bike run better
My bike has the 02 z600e motor on it and I've never changed the oil (don't worry, I got the bike a month ago!) What's the best oil weight and how much does it take? Super noob question, I know, but I don't have any manuals for the bike.
Dropped my bike(2009 650R) well going 40mph, the bike landed on its right side. Damage: - Right mirror completely broken off - rear break and right feet rest completely gone - right side frame scratched up very bad. Just looking at these thing, how much is needed for the fix? Thanks
Hey I was wondering if anyone knew if all the kawasaki 7 bolt design gas caps were interchangable? I have a 1986 Ninja 1000R and found a gas cap on ebay for a 500/500R/EX500. It says it fits all models with 7 bolt design but some ebay companies claim things will fit without knowing/testing. Here's...
whats up everyone. im new to this thread but ive had my 2007 ZX-6R for about 3 years. its got 3302 miles. but recently about 40mph and 4500rpm its got this faint clicking that i can hear but cant find. it goes away when i pull the clutch in. hmm idk. this is my 1st bike so i dont know about bikes...
,I got a kz750n spectre 1982.. Starter spins, engine starts to crank then starter just whirls and stops cranking engine.. had starter apart , cleaned brushes good... battery good.... can u explain how the system is suppose to work on engaging and cranking . Is it like a bad bendix or drive on a...
I just got my bike put back together after fixing a sparkplug wire. I turned the switch on, hit the starter, it turned over and then nothing. It just kept turning over so I unplugged the fuel line right at the tank and it is bone dry inside the hose :mad:. WTF is going on? The gas valve is set to...
Okay , high octane gas does not burn hotter OR cooler , it just burns SLOWER . I was using 93 and my bike , an 82' kz 1000 , ran POORLY . Now she runs like a THEIF , in the NIGHT . The 2 things that affect cylinder temps. are : rich mixture and high compression ratios . Both of these RAISE...
I heard some type of metal rattle on what i feel is my front sprocket, seems to chime in when the bike is above 8K RPMs and vibrating nicely. My warranty runs out in 2 weeks but I dropped the bike and I am pretttty sure that voids the warranty. My chain is tightened and lubed.
Hello all, I'm new to sportbikes, and I just purchased a 2009 zx6r and I was trying to get rid of this lic. plate bracket it's to bulky. Also what is a good anti theft device other than lo jack I can use when I park at my gym. Thank you all in advance.
Hey new to the forums here... i've been trying to find a graphics kit for my 2006 250 ninja. Just one to cover the flames to make them a new color. Anybody know where I can get a kit? or possibly just a sheet that i could cut out my own flames? any help would be great thanks.
Planning on buying a 2009 model this week and was hoping someone could tell me the valve adjustment intervals.The dealer is closed this weekend so I can't ask them
I made a mistake it is a 2006 ZZR-600 not 2004, anyway i would love to get it i had exprerience the summer of 2003 riding a 1992 ninja 600. The dealer wants 3500 but said he would raise the handlebars and a few other things, any advice would be apreciated, thanks, Erica....and it was female ridden.
Anybody heard of these/have them? They claim to be better than draggin jeans because padding in the knee, shin, hip, and tailbone. But it doesn't seem that they protect from road rash. What about draggin jeans with knee pads? Can anybody suggest any knee pads that won't scratch the bike? ...
There are currently 55 users browsing this forum. (0 members & 55 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules