A forum dedicated to Kawasaki Streetbikes and Sportbikes.
This Sticky is for specific questions, concerns and feedback pertaining to the Ninja 250R and 500R.
This Sticky is for specific questions, concerns and feedback pertaining to the following Sportbike Models:
This Sticky is for specific questions, concerns and feedback pertaining to the:
Just a reminder that this is happening in July.
***warning!! this thread is addicting and also some music may not be sutable for work ethic's*****
now onto the fun..
Judgement day (http://video.google.com/videoplay?docid=-5844202458146221973&q=JUDGEMENT+DAY)
Biker Dancing My Humps...
Follow the linkie.
Please note that that any online "free .pdf copies" of authorized Kawasaki Service Manuals violate copyright infringement.
Please refrain from posting any copies, or links to any sites that host free copies of any Kawasaki Service Manuals on this forum. Doing so could result in legal action...
Often questions are brought up about threads being deleted or members being banned by the Moderators or Administration. We hope this thread will help those with questions to understand the process.
Deletion of threads/posts:
As a general rule we donít delete threads w/o cause. If a posted...
I have ZXR H1 750cc and original 36mm Keihin carburetors, 100 000Km (62 000 miles) behind. The problem is this...
1. If i screw the idle to about 1000RPM and then turn the gas, RPM's go to about 4000RPM and stays there...
2. If i turn idle screw that idle is of and give some gas, RPM's come...
What are the two tubes under 650R(09) right next to the stand? When the bike is parked in the open under the hot sun, it always leave a pill of liquid dripping from the tubes
Ok new problem which seems to be my bike's way. Now first I thought it was the starter button, I operated on that and tested, there's juice there. Then I headed to the relay, juice there also switched them around with some from another bike, still no start. It does however started at the voltage...
Lately my fuel gauge has been blinking like it's low on fuel and the word fuel blinks as well. This happens even after I've filled up. It seems to happen when it gets hot out but not in the morning. Anyone have the same problem or know what it might be.
Does anyone know what is a good exhaust for the ER-6N? Is it the same as a 650R?
Been having some trouble finding one
i bought my bike a month or so ago and finally got the title in the mail. and to my shock the odo reads 29,000 miles on the title ( read in 2001!! who know s how many more miles are on it!). but on the bike it says 17k when the bike was sold to me in the paper work says 17k too. Is the dealer at...
Can anyone provide a step by step guide on taking out the battery of 650R(2009)?
My manual says put in 87 gas for my 2009 650r is this correct? or should I be giving it 89 or 93?
Whenever my bike gets rain'd on it takes longer to start vs being dry. Recently it has been getting worse. Last night it rain'd while i was at work and I didn't think my bike was going to start. I turned it over for 3-4 second spurts about 4 times, gave up, and tried it one last time 10 minutes...
Picked up my wheels from the shop yesterday, and put them back on this morning.
It took a few miles to get used to the new profile on the Road Attacks, but once I did I sure liked they way they handled. I've put around 100km on them now, so I'll start riding her "like normal" again......but from...
I was using a battery charger and I think I screwed up my starter relay. These are the symptoms as the pics will show. one wire runs to one "pole" from the battery which dispatches power thought the rest of the bike. Pole 2 is connected to the starter. When I hit the "ignition" button to start the...
remove thread please
New to the forum and am hoping I can get some help here. I recently lost a family member due to a motorcycle accident. The bike which he was riding is a 1993 zx-11 and it was given to me to keep in the family. The bike was well taken care of and it looked amazing! Now it has a few scratches on...
I need to replace the crankcase engine cover on the left side (generator side) due to dropping my bike. I have the new cover, gasket, and a tube of yamaha bond no.4. How do I apply the bond, and where? Should I run a bead the whole way around the gasket contact surface? Both, the engine, and...
I decided after watching a few episodes of Twist the Throttle that I want to buy a bike. I've ridden them before but have never owned one. My wife had a Ninja 250 that I rode quite a bit and I used to ride a Nighthawk back in college. I'm 39 but don't feel that old. I have lots of track...
I bought a street bike powered quad recently and I am trying to identify the year and model engine for tune up parts. I need to know spark plug gap, what plugs to run, what oil filter, and what type of oil.
It's a Suzuki 250R with an unknown year ZX 750 ninja motor.
The engine number is ...
I bought a 01 zx6e last year that had severe road rash. Well I replaced a few parts and had a tune up done on it. I thought that I was ready for the road. Well I got home, and prepared myself 4 my maiden voyage, then the engine starts running funny, two cyclinders stop firing, and take-off has...
I recently purchased this bike and would like to know:
a. what type of oil do I use in the gear case [I presume this is the same oil the clutch runs in?]
b. a fitting come loose and the oil leaked out of the oil injection pump & oil reservoir. What is the correct way to prime this pump and how do...
i have a 93 zx11 and my speedometer wasnt working, so i replaced the speedometer cable and the speed gear that goes on the front axle and it started working. But it worked good for about 5 hours and then the speedometer gauge dropped back to zero and thats what was wrong with it before i replace...
I have a dilemma:
I rode a 250 before it was pretty easy to handle as far as cornering and such. But when it gets past 50 mph in a windy road I can feel the vibration and thus very unstable for me.
I tried a 600 (in fact it was 636). It was stable even past 70 mph but I just seem not able to...
There are currently 25 users browsing this forum. (0 members & 25 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.