A forum dedicated to Kawasaki Streetbikes and Sportbikes.
This Sticky is for specific questions, concerns and feedback pertaining to the Ninja 250R and 500R.
This Sticky is for specific questions, concerns and feedback pertaining to the following Sportbike Models:
This Sticky is for specific questions, concerns and feedback pertaining to the:
Just a reminder that this is happening in July.
***warning!! this thread is addicting and also some music may not be sutable for work ethic's*****
now onto the fun..
Judgement day (http://video.google.com/videoplay?docid=-5844202458146221973&q=JUDGEMENT+DAY)
Biker Dancing My Humps...
Follow the linkie.
Please note that that any online "free .pdf copies" of authorized Kawasaki Service Manuals violate copyright infringement.
Please refrain from posting any copies, or links to any sites that host free copies of any Kawasaki Service Manuals on this forum. Doing so could result in legal action...
Often questions are brought up about threads being deleted or members being banned by the Moderators or Administration. We hope this thread will help those with questions to understand the process.
Deletion of threads/posts:
As a general rule we donít delete threads w/o cause. If a posted...
Hi I was just trying to work out what is wrong with my bike. I just got it the other day and for a week or so it was rideable, the RPMs would just go up in the 4000 and 5000 range whenever i was idling. NOW it wont even stay on for more than thirty seconds. The RPMs for some reason just dip lower...
I turned the ignition on my GPZ, and no lights of any kind at all - not even a neutral light. :cry: But at least the engine starts. :) I rooted under the saddle and found the fuse box, which not only contains fuses but also a sticker telling you what to expect. So, the fuse box...
Hi! I want to learn so I greatly appreciate all advice!!! I was posting on another thread "how many 85 -87 zx600 / gpz600 owners here?" but it was suggested that I make a new thread because I had/have a lot of questions. First of all, my experience consists of pretty much just cleaning a carb on a...
SO i bought a bike off this guy in ANTIOCH, CA and he didn't have the pink. I have purchased many a car like this and normally just go down to the DMV and handle it easily. THis time this dude had over 2000 dollars in back reg and no licence plate. I need to know if i should try to handle this or...
have stock jets in it. would it could it just be running rich? easy to lean out? or does anyone think it is something else? thanx
hi all just joined up
im in the sunny west midlands :lol
is there many member near?
ive got a few TL1000's at the mow
just painted and re-built a 96 ZX6R for a friend
and im looking for a zrx for me and the missus to do some miles next year
Recommended Fork Oil is 10W20 but I've heard that these can benefit from a slightly higher grade oil. I can find single grade Oils at 15W, 20W and 30W. It doesn't get cold around this way.
Any recommendation on the grade of oil to use? Should I maybe look for a 15W30 if I can find one?
Good Evening everyone..
i wanted to share my newest video..
hope you enjoy!
Competition Killers on Vimeo (http://vimeo.com/31765139)
Just wondering how much mileage (actually number of kilometres would be better) you get from a 1986 GPX600R before needing to switch to reserve. Just a rough estimate would be great- My odometer was showing 193 kms'
My first fill up today took a bit over 11 litres , but the gauge was showing...
would anybody know how many models kawasaki made of the 1979 kz1000st shaft drive models.i only heard they made like 200 models.
I am restoring an 89 ZX-10. I'm putting it back to stock for. The needles in the carb are after market with the adjustment slits. The stock needles are no longer available. I'm wondering if someone can give me the measurement from the bottom of the needle to the bottom of the "head". That way...
Hi All ive been looking now for some time to find a aftermarket exhaust system for my old zzr 1100, ZX 1100 i thnk it is in the USA.
If anyone can help with plans to mod the factory system or knows of a zzr 1200 factory system forsale could you please let me know.
2nd hand is fine it dont...
I've been trying to find smoked turn signals for my 6r without much luck.. I do want to keep the stock turn signals.. just change the lens from the clear ones to the smoked one... anyone have any luck with that?.. really appreciate if you could point me in the right direction.
Also.. looking for...
Ok so Im looking into what mods i can do to my 09 250r to look, and perform better.
ive seen mods done that i would like to do but am haveing a hard time finding parts to do the mods/swaps, such as 97 aprilia rs250 swing arm ( or 08 r6 swing arm, will be done shortly ordered part just waiting on...
As if I didn't drive my wife crazy enough, with my obsessive tinkering on my ZX-12 and two brand X bikes, I have just acquired my father-in-law's 1978 KZ1000 LTD. He bought it new in 78, road it two years and parked it until 2009; with no storage prep! In 2009, he decided to give it another chance,...
I re jetted my engine yesterday and its running allot better, but i am noticing sputtering at 7k RPM on each shift, I still have the pilot jets and im using 112.5s and i have some 117.5s , the originals were 105.5
Hey guys, wanted to see whats all going on
This is my first bike of many im sure, ive done a little to it so far and probably not done :p
My dad restores old muscle bikes Ex; kawasaki elimators, zl1000, honda v65, yamaha vmax and plenty more, so I thought it was fair time to get into them and...
I am fairly new, But I just wanted to say Hi and I am new to the forum. Here is a pic of my bike.
are the main jets the same in each carb or are they different thanks fast78
An interesting product I came across HOME (http://www.profill-australia.com/e-store/HOME.html) . It's meant to stay inside the tank and filter the fuel as you refill. Unfortunately they don't make them for road bikes with locking caps.
Has anyone come across anything similar?
They have a...
There are currently 69 users browsing this forum. (0 members & 69 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.