A forum dedicated to Kawasaki Streetbikes and Sportbikes.
This Sticky is for specific questions, concerns and feedback pertaining to the Ninja 250R and 500R.
This Sticky is for specific questions, concerns and feedback pertaining to the following Sportbike Models:
This Sticky is for specific questions, concerns and feedback pertaining to the:
Just a reminder that this is happening in July.
***warning!! this thread is addicting and also some music may not be sutable for work ethic's*****
now onto the fun..
Judgement day (http://video.google.com/videoplay?docid=-5844202458146221973&q=JUDGEMENT+DAY)
Biker Dancing My Humps...
Follow the linkie.
Please note that that any online "free .pdf copies" of authorized Kawasaki Service Manuals violate copyright infringement.
Please refrain from posting any copies, or links to any sites that host free copies of any Kawasaki Service Manuals on this forum. Doing so could result in legal action...
Often questions are brought up about threads being deleted or members being banned by the Moderators or Administration. We hope this thread will help those with questions to understand the process.
Deletion of threads/posts:
As a general rule we donít delete threads w/o cause. If a posted...
Attention: Voyager or other heavy cruiser drivers out there --
Has anyone found or does anyone know of a metzeler 880 tire to fit the rear? This bike isn't on their fitment list as they apparently don't make the exact replacement size, which is 170/70B16.
I don't really want to get the same...
I'm trying to locate the main 30A fuse on a 95 zx6e, I found the fuse block under the passenger seat but it's not in there and I have no power to the fuse block. Can someone point me in the right direction?
i don't frequent on here too much except to see what you guys have done to your bikes but im hoping as a group you guys could come together and help a new comer out.
my 04 zx6RR was stolen Monday the 25th in front of my condo in Seymour Connecticut.
the vin number was/is until...
hi folks im new on here so hello im in uk to i bought a zx9b4 ,if i hold clutch in and in gear it will start ,even with stand down ,any ideas all help appreciated :)
I just bought a brand new 2011 Kawasaki Ninja 100 which is the model: ZX1000GBF , when i looked at this bike and the reviews typical of new items i didnt find any bad reviews so from a person who likes the sport bike style but likes to go for long distance rides with a passenger i thought this...
1979 kz1000 st carburetor accelerator pump with hard diaphram cause throttle to stick.
My 1979 KZ1000 St oil light comes on when under 1500 rpm's. The owners manual said the idle speed is 1000 +or- 50 RPM's. The oil level if in the range and I'm running 15-40 Chevron DELO oil.
This guy is claiming that this is a 1990 Ninja 600. Does it appear to be one to you? He wants $200 for it, no seat, fairings, ignition, or gas tank. Was bought at police auction. I thought it might make for a fun project...it will be my first motorcycle!
has anyone changed the clipons from a zx10 with higher bars. i was thinkin of changin my zx10 top tripleclamp with the top tripleclamp and bars off a z1000 of the same year model. my zx10 is 2005 so maybee 2005 z1000 will suit any ideas or suggestions would be appreciated
HI - I haven't had much luck finding info on peoples' experiences putting a PCV on a 2009 Er6n. I have a Yoshi TRC slip-on I installed last year on my ER6n, and get a lot of decel popping and pretty rotten low-end performance since. It was recommended by Yoshi to re-map, so I just ordered the PCV...
i need help my friend got a 1981 750 ninja he put in new plugs and wen he rids hi ways it run fine but if he leat off the gas it die and will not strat for about 5 min what is going on????
my bike was running just fine ...then all of a sudden it just acted like i was out of gas !
It will start but soon as u give it gas it dies .... but it only starts for a few seconds !!!!
I have flushed the tank
made sure the fuel pump was working
checked the fuel filters (...
I purchased my first bike today. It's a 1984 GPZ900. I'm pretty excited as I have never owned any kind of street bike, though I rode dirt bikes when I was younger.
The bike seems to run well and is strong. But I am sure there will be things I need to do to keep it running, and in...
Just found a lightly used 1979 KZ1000st, front end seems really soft. What are suspension fixes for excessive dive on this model? I've seen aftermarket shocks on these, any upgrade suggestions there? Oh yeah, anyone know if this model has ball or needle bearings installed in fork head?
Hey everybody, I live in leominster, ma and most of my friends ride harleys or cruisers and im looking for people around central mass that ride sportbikes. I love riding more than anything but riding alone gets old. Thanks
I found this bike for sale for $2,500 not sure if its worth the price its at a local dealership.
Its an 1989 zx-7 bike looks amazing around 20,000 miles i would post a pic up but it wont let me. This link should take you to a pic of it.
I have an issue with the injection on my bike. Everything light up as normal but the pump won't start. There is a strange crackling noise under the seat and if I push a little at the cables under the seat (left side) it goes on. By the way , it's also resets the time !
just bought a 1982 kaw KZ1000 csr didnt have a tach so i bought one off ebay not sure where to plug the electrical connector and my horn barely squeeks when i push the button any help will be appreciated.
My zzr doesn't crank an no power to the starter there is power going in to the starter solenoid just not out the fuse is still good an I can jump the 2 starter solenoid wires an it stats any suggestions would really help thank you.
I am new to this site and riding. I have a 2002 250 Ninja that has been sitting inside my garage for 1 year+. I went to start it the other day and it would not start so I charged up the battery and it finally started however, I can only start it with the choke and as soon as I...
There are currently 51 users browsing this forum. (0 members & 51 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.