What does this hose hook up to on 250 ninja carb

[250 ninja]

I recently got a 98 250 Ninja that has been sitting for two years and a hose is missing from the T that goes between the tops of the two carbs. I dont know what this hose is for or if it needs to be hooked up to something, they look like they might be a vent for if the float valve stays open but I would inmagine that 92059C needs to get hooked up to something because it could let dirt right into the float bowls........ any insight would be appreciated.

I have put a picture of the pieces in question at

http://www.joeschorsch.com/ninja.htm

JCS

[QKENUF4U]

its just a vent line. put a new hose on it that hangs down between the carbs.

[routine8]

Hey Ive got a similar question:

I took apart my carb and cleaned it, and now I cant figure out how to properly hook the thing back up.

I know where the main fuel line goes, but the other line coming from the tank is giving me a problem.... I dont know where to plug it in, nor do I know where to plug in the two-to-one coming out if the top of the throttle bodies in the carb......

Please help!!!!!

[QKENUF4U]

1. the other line coming from the tank is giving me a problem.... I dont know where to plug it in,
2. where to plug in the two-to-one coming out if the top of the throttle bodies in the carb......

1. is this a smaller line that comes from the petcok ? if so then that is your vacumn line and it goes to your #1 carb nipple between the carb body and the head.

2. the two-to-one line is just a set of vent lines. just leave it alone or put a longer line on it and run it down towards the rear wheel area

[sci fly]

www.ninjaguide.com for the people with ninjas, they have all part specs and engine specs since about 89 for most models