Forum: Projects and "How To" Write Ups

well, just picked this ol beast up off of craigslist and shes in need of some work.. fuel pump Gave up the ghost (possibly the relay as well.. not gettin DC volts to the pump wires) front foks need to be bolted up, and an title issue i think ill beable to fix..dismantle title but i think an...

I have a 1995 Kawasaki Ninja zd 900 r, i need to know how the speedometer cable is assembled in the front tire. are there diagrams to so show me or something..

so hypathetically speaking, if i wanted to change my fuel tank on my 07 900, do i have to look for one with a fuel pump in it or could i remove the original fuel pump from my own tank?and install it in the new tank.. or, could i possibly mount an external fuel pump and just run lines and filter to...

A little history first. 13 years ago when we first moved into our house, a man down the street from us shot and killed his wife then himsself. Last week his oldest son moved back into the house. I have been helping to clean out. He gave me his dad's moto frame. I know it is stamped as t100r, but...

Alright check it out. I wrecked this 03 zzr600...front end got jacked up and couldn't find cheap used parts for that model...so...i converted the front end into the 05-08 zzr600....still used same fairings nd all that...i just changed the forks, tree, brakes, wheel, everything...bike runs fine...

Hi all... I put together a set of videos... I know they stink... i had to get the job done though so I just put them together the best i could please do not mind my language towards the last videos... this job took me a long time... i started around 9 am, and was done with everything...

hey hows it goin, Im workin on a kz440 bobber/chopper project whatever you wanna call it. But I find it looks kinda funny with the front forks so high at their regular height. I would like to lower it, but I imagine this would set off all the balance of the bike. I'm looking to lower it an inch or...

hi everybody i'm ready... the bike: vn 800 classic 1996 the customizer: me things to do: -new handlebar (dirt-track), grips and old school round mirrors; -spring bobber seat (from sinners sweden eh eh); -cut rear fender and buy a new taillight;

He has been wanting me to work on for about 18 months and I finally gave in. The bike arrived on March 12. Needless to say that it needed more than the starter clutch repaired. A lot of cleaning would be needed and a few parts to make it road worthy. I've worked on it a few evenings a...

I have a '95 800A and I got a line on some front forks from a '06 800. the part numbers for the triple trees seem to be the same. Anybody have a clue if they will fit my triple tree? I already have a front wheel, rotor and caliper from a '02 Classic and have been looking for the forks to switch out...

I have a 2005 kxf250 that i bought about a year ago. after being stored for the winter i have been having some problems. the bike has been staling on idle, so i tried to increase the idle, after i increased the idle i believe that the bike started to leak coolant. i need some help...thanks.

to paint a Vulcan 500? Both fenders, tank and two side covers. I'm gonna paint her Yellow Pearl and at $175 per quart I don't want to buy three quarts if two will do. Thanks

Is there a bigger tank available for a 97 Classic 1500. maybe even with a few modifications.

i bought this 2003 kx125 and it doesnt seem like clutch is working.i put it in gear with clutch in it jumps and dies. ive noticed the clutch cable is adjusted all the wayout.i asked the guy i bought it from he says it worked fine last summer. its now about 5 degrees and im wondering if it could be...

zx10 1989 what fairing fit on this bike as want to change fairings and rear end on bike cheers