need help on my 2008 kawasaki 250 turn signal

[Deion]

I replace the front turn signal but it only turn the light on without the flashing part, what should I do?

[aftermath4788]

put the old ones back on and see if they do the same thing. If they work find then maybe it is how you hooked up the new ones or maybe the new ones arent working properly.

[Uthor]

Did you replace them with LEDs? You might not have enough resistance to activate the flasher circuit. Try the sportbike section where you'll most likely get a better response.

[Saleenguy]

Originally Posted by Uthor

Did you replace them with LEDs? You might not have enough resistance to activate the flasher circuit. Try the sportbike section where you'll most likely get a better response.

If thats the problem, and the new lights do not draw enough power to trigger the flasher....you can buy new, more sensitive flasher to.
try a good auto parts place, they should have them.

[Saleenguy]

ps. be sure the ground is hooked up, clean, and secure as well.
I see more lighting problems due to bad grounds than all other reasons combined...........well except blown bulbs...........