KZ550 Sissy Bar

grumpy56 · 07-04-2009

I have an Amco sissy bar (#93576) for a 1980-1981 Kawasaki KZ550. It is in its original packaging except for one of the legs which I removed to ensure the chrome is good (it is). In terms of fitment, there are two holes at the front end of the bracket. One is an oval hole (Call it hole A1, closest to the end), other is a round hole (Call it hole A2, about 1/4 inch away). Then there is the other main mounting hole down the bracket a bit(call it hole B). Distance from center of hole A1 to center of hole B is 9 3/8 inches. Distance from center of hole A2 to center of hole B is 8 3/8 inches. Approx overall length is 20 inches long (looking at side of bike from front to back). Overall height is about 28 inches high. You can have it for my cost of $40.00 as it is just not going to work on my 1000. Thanks.

ImaginaryKaos · 07-05-2009

I have a KZ550 LTD... think it might fit?

grumpy56 · 07-05-2009

Hey IK. Yes, I believe it will as the installation sheet says "19080-1981 KZ550 LTD". Do the measurmeents seem right for your bike?

haywagon2000 · 07-16-2009

hey Grumpy...I am interested in the backrest if it is still available.

grumpy56 · 07-16-2009

Hey Haywagon. I didn't have any inquiries about the sissy bar for a month and then got 3 today. Strange. There are 2 guys ahead of you, but if neither one of them takes it within a day or two I will be PM you. Thanks.

haywagon2000 · 07-17-2009

sounds good...keep me posted.

grumpy56 · 07-18-2009

now 1 ahead of you haywagon

haywagon2000 · 07-18-2009

ok-i've got my fingers crossed.

SouPortugues · 09-13-2009

Hey Grumpy, can I get in line after haywagon?

07-04-2009	#1 (permalink)
grumpy56 Turtle Wax Taster BTK Intermediate Join Date: Dec 2008 Location: Yorba Linda, CA Posts: 151	KZ550 Sissy Bar I have an Amco sissy bar (#93576) for a 1980-1981 Kawasaki KZ550. It is in its original packaging except for one of the legs which I removed to ensure the chrome is good (it is). In terms of fitment, there are two holes at the front end of the bracket. One is an oval hole (Call it hole A1, closest to the end), other is a round hole (Call it hole A2, about 1/4 inch away). Then there is the other main mounting hole down the bracket a bit(call it hole B). Distance from center of hole A1 to center of hole B is 9 3/8 inches. Distance from center of hole A2 to center of hole B is 8 3/8 inches. Approx overall length is 20 inches long (looking at side of bike from front to back). Overall height is about 28 inches high. You can have it for my cost of $40.00 as it is just not going to work on my 1000. Thanks. __________________ Lew 82 KZ1000-J2 06 H-D FXD35 In the past...72 H-D SS350, 72 GT380, 75 Z1B, 77 XLH, 79 CB750K Last edited by grumpy56 : 07-04-2009 at 08:13 PM. Reason: Sorry, only paid $35.00 for it (including shipping).

07-05-2009	#3 (permalink)
grumpy56 Turtle Wax Taster BTK Intermediate Join Date: Dec 2008 Location: Yorba Linda, CA Posts: 151	Hey IK. Yes, I believe it will as the installation sheet says "19080-1981 KZ550 LTD". Do the measurmeents seem right for your bike? __________________ Lew 82 KZ1000-J2 06 H-D FXD35 In the past...72 H-D SS350, 72 GT380, 75 Z1B, 77 XLH, 79 CB750K

07-16-2009	#5 (permalink)
grumpy56 Turtle Wax Taster BTK Intermediate Join Date: Dec 2008 Location: Yorba Linda, CA Posts: 151	Hey Haywagon. I didn't have any inquiries about the sissy bar for a month and then got 3 today. Strange. There are 2 guys ahead of you, but if neither one of them takes it within a day or two I will be PM you. Thanks. __________________ Lew 82 KZ1000-J2 06 H-D FXD35 In the past...72 H-D SS350, 72 GT380, 75 Z1B, 77 XLH, 79 CB750K

07-18-2009	#7 (permalink)
grumpy56 Turtle Wax Taster BTK Intermediate Join Date: Dec 2008 Location: Yorba Linda, CA Posts: 151	now 1 ahead of you haywagon __________________ Lew 82 KZ1000-J2 06 H-D FXD35 In the past...72 H-D SS350, 72 GT380, 75 Z1B, 77 XLH, 79 CB750K

09-13-2009	#9 (permalink)
SouPortugues Still On The Kickstand BTK Beginner Join Date: Jul 2008 Location: Nashville, TN Posts: 49	Hey Grumpy, can I get in line after haywagon? __________________ 1981 KZ550 LTD 1982 Rider 2000 Nissan Frontier 2001 Haro

07-05-2009	#2 (permalink)
ImaginaryKaos Newbie Join Date: May 2009 Posts: 6	I have a KZ550 LTD... think it might fit?

07-16-2009	#4 (permalink)
haywagon2000 Newbie Join Date: Jul 2009 Posts: 3	hey Grumpy...I am interested in the backrest if it is still available.

07-17-2009	#6 (permalink)
haywagon2000 Newbie Join Date: Jul 2009 Posts: 3	sounds good...keep me posted.

07-18-2009	#8 (permalink)
haywagon2000 Newbie Join Date: Jul 2009 Posts: 3	ok-i've got my fingers crossed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Sissy Bar to fit '84 KZ550	cwrighta70	Accessory Swap Meet	1	07-07-2009 10:54 AM
Making a sissy bar fit a 900	Dajur	Kawasaki Cruisers	5	06-04-2009 05:09 PM
Ghost brackets and Sissy bar.	Bustcard	Kawasaki Cruisers	12	06-01-2009 10:26 AM
WTB Sissy Bar for '85 KZ550	cwrighta70	Accessory Swap Meet	0	04-03-2009 11:33 AM
Product Review - Saddlemen Renegade II Sissy Bar Bag	BigJohn	Kawasaki Cruisers	1	06-30-2005 10:58 AM