Part name wondering where to buy

Schma · 09-24-2009

So I am not sure what this part is or where I can get a replacement. Mine is currently cracked pretty bad on the outside, it hasn't gotten to the inside yet but I am pretty sure it is getting there and I would like to replace them. The part that I need info on is the rubber part circled.

Any help would be appreciated.

RichLockyer · 09-24-2009

Part number 16065-1027
Carburetor Holder.

You can check with Beartooth, but from a 1980, unless it also fits a more current bike, it's probably no longer stocked by Kawasaki.
Check with Z1... if they can't get it, maybe they can give you a lead on a source.

aaronrkelly · 09-24-2009

z1 or ebay....dont forget ebay

used ones in good condition should work fine.....done it quite a few times with good results

brown recluse · 09-24-2009

Kawasaki Twin Owners Forum is a large group of owners and experts on the older bikes. I remember that some time back they had located someone outside the U.S. who would make new rubber parts for older bikes.

herk · 09-24-2009

Kawasaki.com has parts diagrams in the Owner Info section. It seems easiest to do the Search-by-Model-Info without entering a vin or anything. Just pick a year only, then choose a bike from the list. There's cross-reference & other info within the diagrams - click stuff.

The carb holders are usually in the Cylinder head diagram.

V2K_CCTX · 09-24-2009

ebay +100

CaliGPZ · 09-24-2009

Think I saw them on Z1 for like $53 for the set....

sd.farmgirl · 09-25-2009

check out these sites. all have diagrams. you can find the part name and number and compare prices. www.babbitsonline.com , Buy Kawasaki ATV Parts, Kawasaki Motorcycle Parts, Kawasaki Jetski Parts, Kawasaki Mule Parts , Best prices on Honda | Yamaha | Suzuki | Kawasaki Motorcycle parts and ATV parts. , Yamaha Parts, Honda Parts, Kawasaki Parts, Sea-Doo Parts, Ski Doo Parts, Motorcycle, ATV Parts , Motorcycle Parts, Motorcycle Accessories – BikeBandit.com

parts-4-sale · 09-26-2009

Quote:

Originally Posted by Schma

So I am not sure what this part is or where I can get a replacement. Mine is currently cracked pretty bad on the outside, it hasn't gotten to the inside yet but I am pretty sure it is getting there and I would like to replace them. The part that I need info on is the rubber part circled.

Any help would be appreciated.

carbuetor intake holder. from your picture u have kz400 ? i do have kz400 and kz750 holders on my site parts-4-sale.com

RichLockyer · 09-26-2009

Quote:

Originally Posted by parts-4-sale

carbuetor intake holder. from your picture u have kz400 ? i do have kz400 and kz750 holders on my site parts-4-sale.com

He's got a 1980 KZ440LTD.

Schma · 09-27-2009

Thanks for all of your help guys, I was able to find replacements at a salvage yard today. One more step complete in restoring the bike.

09-24-2009	#1 (permalink)
Schma Still On The Kickstand Join Date: Sep 2009 Location: Mountainous Regions of Utah Posts: 30	Part name wondering where to buy So I am not sure what this part is or where I can get a replacement. Mine is currently cracked pretty bad on the outside, it hasn't gotten to the inside yet but I am pretty sure it is getting there and I would like to replace them. The part that I need info on is the rubber part circled. Any help would be appreciated.

09-24-2009	#2 (permalink)
RichLockyer Patriot Guardian Extreme Forum Supporter Join Date: May 2006 Location: Chino, CA Posts: 28,016	Part number 16065-1027 Carburetor Holder. You can check with Beartooth, but from a 1980, unless it also fits a more current bike, it's probably no longer stocked by Kawasaki. Check with Z1... if they can't get it, maybe they can give you a lead on a source. __________________ - Rich 2006 1600 Ultra-Classic Patriot Guard Rider *Please put your bike year/model in your sig line or fill in your profile before asking for help.*

09-24-2009	#6 (permalink)
V2K_CCTX RIDING LIKE I STOLE IT BTK Expert Join Date: Jul 2007 Location: Corpus Christi, TX Posts: 7,413	ebay +100 __________________ 07 ZX14 Kawi Lime Green (32/50) 07 VN2000LT White/Ti 07 GV650 03 BMW 745Li 00 VW 1.8T Beetle

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Part number for VN800 - exhaust nut studs	Sayen	The Mechanics Corner	4	07-23-2009 10:57 AM
Protective Advice adn Questions	kbash	Riding Gear	6	04-23-2009 07:29 AM
Where to buy and which one to buy??	99vulcan99	Kawasaki Cruisers	6	03-29-2008 07:52 PM
Attention Red Lodgers !!!!!!!!!	Spok	Main Lobby	114	06-22-2007 07:13 PM

09-24-2009	#3 (permalink)
aaronrkelly Patriot Guard Rider BTK Expert Join Date: Aug 2007 Location: Southern Iowa Posts: 517	z1 or ebay....dont forget ebay used ones in good condition should work fine.....done it quite a few times with good results

09-24-2009	#4 (permalink)
brown recluse Vulcan 500 Rider BTK Intermediate Join Date: Oct 2006 Location: South East US. Posts: 153	Kawasaki Twin Owners Forum is a large group of owners and experts on the older bikes. I remember that some time back they had located someone outside the U.S. who would make new rubber parts for older bikes.

09-24-2009	#5 (permalink)
herk bustedfeet BTK Expert Join Date: Jun 2006 Posts: 1,780	Kawasaki.com has parts diagrams in the Owner Info section. It seems easiest to do the Search-by-Model-Info without entering a vin or anything. Just pick a year only, then choose a bike from the list. There's cross-reference & other info within the diagrams - click stuff. The carb holders are usually in the Cylinder head diagram.

09-24-2009	#7 (permalink)
CaliGPZ Newbie Join Date: Aug 2009 Location: SoCal Posts: 13	Think I saw them on Z1 for like $53 for the set....

09-25-2009	#8 (permalink)
sd.farmgirl Newbie Join Date: Sep 2009 Posts: 8	check out these sites. all have diagrams. you can find the part name and number and compare prices. www.babbitsonline.com , Buy Kawasaki ATV Parts, Kawasaki Motorcycle Parts, Kawasaki Jetski Parts, Kawasaki Mule Parts , Best prices on Honda \| Yamaha \| Suzuki \| Kawasaki Motorcycle parts and ATV parts. , Yamaha Parts, Honda Parts, Kawasaki Parts, Sea-Doo Parts, Ski Doo Parts, Motorcycle, ATV Parts , Motorcycle Parts, Motorcycle Accessories – BikeBandit.com

09-27-2009	#11 (permalink)
Schma Still On The Kickstand Join Date: Sep 2009 Location: Mountainous Regions of Utah Posts: 30	Thanks for all of your help guys, I was able to find replacements at a salvage yard today. One more step complete in restoring the bike.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)