750CSR wheel on 550LTD

ChicagoLTD · 10-12-2009

I am wondering if a stock wheel from an 82 KZ750CSR will be a direct match to my 81 KZ550LTD.

Does anyone know this off hand? Im checking parts diagrams right now but i was hoping for a quick answer!

herk · 10-12-2009

I'm gonna go out on a limb and say that the front wheel is a direct bolt-on. Not sure about the rear.

The 750-CSR front wheel has many of the same parts as the 650-CSR & 550-Ltd. The KZ550-Ltd wheels are a direct fit to the KZ650-CSR - it should work the other way around. So, if A = B & B =C, then A = C. Both CSR models have the same 4-bolt front brake disk. The 750-CSR has 40 spokes per wheel. The 650-CSR has 48.

ChicagoLTD · 10-12-2009

Thanks, sorry i should have specified in the original post that i was looking for a rear wheel.

But i checked every component in the parts diagram and the Rear is compatible- for anyone else ever wondering!

herk · 10-12-2009

If the rear axle, spacers, shock damper, etc are the same then it'll probably fit.
I bet the 750-CSR has the same panel assy as the 650-CSR.
The 650's is interchangeable w the 550 (the 550 panel is black; the 650-CSR's is silver).

10-12-2009	#1 (permalink)
ChicagoLTD Newbie Join Date: Jun 2009 Posts: 8	750CSR wheel on 550LTD I am wondering if a stock wheel from an 82 KZ750CSR will be a direct match to my 81 KZ550LTD. Does anyone know this off hand? Im checking parts diagrams right now but i was hoping for a quick answer!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
21" Front Wheel for a Vulcan 900 Custom -Some Damage	drnk_n_publick	Accessory Swap Meet	0	10-28-2008 06:00 PM
Wheel Traps	Bad Company	What I learned today	1	11-27-2006 07:12 PM
Replacement starter relay/solenoid	therealSnafoo	The Mechanics Corner	13	04-04-2006 10:02 AM
frame polishing	theorangezx-7r	Kawasaki Streetbikes/Sportbikes	4	09-28-2005 02:22 PM
Help with wheel wobble ('02 Ninja 500R)	fhqwhgads	The Mechanics Corner	3	05-19-2004 04:56 AM

10-12-2009	#2 (permalink)
herk bustedfeet BTK Expert Join Date: Jun 2006 Posts: 1,780	I'm gonna go out on a limb and say that the front wheel is a direct bolt-on. Not sure about the rear. The 750-CSR front wheel has many of the same parts as the 650-CSR & 550-Ltd. The KZ550-Ltd wheels are a direct fit to the KZ650-CSR - it should work the other way around. So, if A = B & B =C, then A = C. Both CSR models have the same 4-bolt front brake disk. The 750-CSR has 40 spokes per wheel. The 650-CSR has 48.

10-12-2009	#3 (permalink)
ChicagoLTD Newbie Join Date: Jun 2009 Posts: 8	Thanks, sorry i should have specified in the original post that i was looking for a rear wheel. But i checked every component in the parts diagram and the Rear is compatible- for anyone else ever wondering!

10-12-2009	#4 (permalink)
herk bustedfeet BTK Expert Join Date: Jun 2006 Posts: 1,780	If the rear axle, spacers, shock damper, etc are the same then it'll probably fit. I bet the 750-CSR has the same panel assy as the 650-CSR. The 650's is interchangeable w the 550 (the 550 panel is black; the 650-CSR's is silver).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)