2010 Kawasaki Mule™ 610 4x4 Picture & Specs

2010 Kawasaki Mule™ 610 4x4 Specifications:

Engine Four-stroke, air-cooled single
Displacement 401cc
Bore x stroke 82 x 76mm
Compression ratio 8.6:1
Carburetor Nikki 6C1026
Air filter Snorkel-type with two-stage dry replaceable element
Oil filter Automotive-type spin-on canister
Ignition Magneto and transistor

Motorcycle Spotlight:

Electrical 12V DC, 14 amp-hour battery, alternator
Transmission Continuously variable transmission with high and low range, plus reverse
Final drive Shaft-driven selectable four-wheel drive, dual-mode rear differential
Exhaust Muffler with USFS-approved spark arrestor
Front tires 24x9-10 tubeless
Rear tires 24x11-10 tubeless
Front suspension / wheel travel MacPherson strut / 3.1 in.
Rear suspension / wheel travel Unit swing axle / 3.1 in.
Steering Rack and pinion

Motorcycle Resources:

Brakes Four-wheel hydraulic drums, triple sealed
Fuel capacity 4.1 gal.
Dry weight 1,010 lbs.
Overall length 108.8 in.
Overall width 52.6 in.
Overall height 70.9 in.
Wheelbase 70.0 in.

Kawasaki Dealers:
North Dakota Kawasaki Dealers

Ground clearance 6.7 in.
Roll over protective structure (ROPS) This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement
Cargo bed dimensions (LxWxH) 41.1 x 35.4 x 9.6 in. / 10.9 cu. ft.
Load capacity 926 lbs.
Cargo bed capacity 400 lbs.
Towing capacity 1,100 lbs.
Turning radius 10.8 ft.
Top speed 25 mph, governed
Instruments Oil temperature meter, hour meter, 35w headlights, taillight and stoplight
Color choices Dark Royal Red, Smoky Blue
Good Times™ Protection Plan 12 or 24 months
Warranty 12 Months

* Price and specifications subject to change