Kl250 no spark
2000 kl250 cranks but no spark or 12v at coil. I phoned out the wire from cdi to coil. It was good. Checked for power and ground at cdi. Had both. Checked fuses even with a test light on either side of the fuses. I ohmed out the kill switch is good. Bypassed kick stand and clutch switches. I bought a used “known good” cdi. Replaced coil and boot, stator, diode, and new battery. Still no spark.. I just took the harness off the bike and inspected. No problem found yet.. anyone have any advise?