Kawasaki Motorcycle Forums - View Profile: wiredgeorge
BTK Expert

wiredgeorge wiredgeorge is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 6 of 6
  1. 10th MTN
    01-08-2019 09:40 PM - permalink
    10th MTN
    George,

    I fixed the issue, sorry to have bother you.

    I cleaned all the (original) old white electrical plugs with electrical solvent cleaner. Removed the fuses and used a 22 Cal brush and cleaner to clean them up. Reinstalled the fuses and it fired right up.

    Sorry to have bothered you, still plan on stopping by and saying hi (maybe in the spring.

    V/R, Pete
  2. 10th MTN
    01-08-2019 06:12 PM - permalink
    10th MTN
    Hi George,

    Im in stone oak. Maybe you can help a guy out?

    So I washed my GPZ on Sunday and now when I turn the key to its on position it blows the main 20amp fuse. I have a volt meter, but I'm not sure how to run this open ground down

    I unplugged the regulator thinking that it got wet and was shorting out inside but it made no difference, the 20 amp fuse still blows the second I switch the key to on.

    Can you please provide any guidance?
  3. Brdana
  4. chandoidunghoi
  5. TARTANKAWA
    05-12-2018 07:09 AM - permalink
    TARTANKAWA
    hi can you help with my headlight wiring conection problem.
  6. Cam.Mencio
    05-03-2018 10:21 AM - permalink
    Cam.Mencio
    Hey man, let me know what, if any other questions you might have...

  About Me

  • About wiredgeorge
    Occupation
    Owner, wiredgeorge Motorcycle Carburetors
  • Signature
    wiredgeorge
    Texas Hill Country

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 09-12-2019 09:40 AM
  • Join Date: 10-15-2004
  • Referrals: 4

  Mentions

07-02-2017
03:53 PM - Boanerges1 mentioned wiredgeorge in post KZ440 LTD won't start
...m/small-engines/ @wiredgeorge: Thanks so much for ...
06-25-2017
10:40 AM - Boanerges1 mentioned wiredgeorge in post KZ440 LTD won't start
wiredgeorge: In carefully studyi...
01-02-2017
09:30 PM - CurtisKaw1 mentioned wiredgeorge in post No matching ID numbers!?
... input. Thank you - wiredgeorge
07-12-2016
12:49 PM - BetaDnB mentioned wiredgeorge in post Inconsistent oil level in sight glass
wiredgeorge, my neighbor likely ...

  Quotes

08-22-2019
11:49 AM - mdub23 quoted wiredgeorge in post VN750 - Front bevel gear case leaking oil
Best to buy an OEM gasket and re...
07-14-2019
11:00 AM - bille6 quoted wiredgeorge in post '78 Z1R charging system question
A reg/rec can have two ways of f...
07-06-2019
01:26 PM - wiredgeorge quoted Derek1157 in post Battery/electrical issues
I am no expert, but I think yo...
05-25-2019
02:45 PM - wiredgeorge quoted marshtiger58 in post KZ1100D Spectre Title Issues
...? Thanks, marshtiger58 You might want to...
03-22-2019
12:47 PM - jpd quoted wiredgeorge in post Carb slide not working?
Not following your explanation t...
03-17-2019
10:01 AM - jpd quoted wiredgeorge in post Carb slide not working?
The throttle butterfly is on a s...
03-16-2019
08:07 PM - wiredgeorge quoted jpd in post Carb slide not working?
Is the throttle plate op...
03-15-2019
12:44 PM - jpd quoted wiredgeorge in post 1980 KZ440 A1 Fuel leaking from exhaust on left side
The carburetors need balanced ak...
03-10-2019
10:05 AM - bille6 quoted wiredgeorge in post KZ750 engine into an '81 KZ550 LTD?
Wear in the bearing surfaces won...
03-08-2019
11:38 AM - calebsmith12890 quoted wiredgeorge in post 1980 KZ440 A1 Fuel leaking from exhaust on left side
When you have the leak, it is on...
09:48 AM - bille6 quoted wiredgeorge in post KZ750 engine into an '81 KZ550 LTD?
The oil light comes on because t...
03-07-2019
05:31 PM - davidr1963 quoted wiredgeorge in post KZ750 engine into an '81 KZ550 LTD?
Cylinder spacing the the 550 is ...
12-28-2018
09:22 AM - Hilts quoted wiredgeorge in post No crank just clicks
The OP hasn't returned to respon...
11-16-2018
11:55 PM - kawpaul quoted wiredgeorge in post Carbtuning The Carbs - Vacuum Line??
Interesting... I thought a GPz h...
11-09-2018
01:58 PM - wiredgeorge quoted kawpaul in post Carbtuning The Carbs - Vacuum Line??
I synced my carbs on my gpz ...
08-30-2018
05:54 PM - wiredgeorge quoted [email protected] in post Spoke Wrench Vulcan 900
I realize this thread is many years old, bu...
08-20-2018
04:05 PM - Hottwinsauce quoted wiredgeorge in post New to the site and new to the 750 twins
Trying to make sense... you are ...
08-14-2018
01:32 PM - Mike Reed quoted wiredgeorge in post Another guy into cafe racers
Not sure what a shed builder is ...
08:59 AM - wiredgeorge quoted VulcanDrifter in post Air filters
If your bike has CV carbs, you're ...
08-13-2018
08:01 AM - davidr1963 quoted wiredgeorge in post Another guy into cafe racers
Not sure what a shed builder is ...
 
For the best viewing experience please update your browser to Google Chrome