Kawasaki Motorcycle Forums banner
brakes
1-5 of 5 Results
  1. The Mechanics Corner
    Hi Everyone, I recently removed my front wheel to get the fender vinyl wrapped. The removal was pretty straight forward, remove brake caliper, loosen the tension bolt on the front fork, remove axle and done. During the removal I must have hit the front brakes. I didn't think anything of it. The...
  2. Vintage Motorcyle Info
    Recently picked up a 1982 GPZ550 which has been sat for a while and wanting to get it back on the road. I'm currently tackling the brakes and the rear brake master cylinder is very corroded and rather than rebuild I was hoping to replace but struggling to find one and most suppliers/dealers I've...
  3. Kawasaki Motocross and Offroad
    Went for a ride this morning discovered my back brakes weren’t working. Opened her up the reservoir was bone dry I filled it up and loosened the drip valve but the fluid doesn’t seem to be pumping through there anybody know what’s going on with this thing?
  4. New Member Introductions
    Broke brake line going to the front right tire. 1. Can i replace just this line? 2. Will this broken line lock up my other tires?
  5. Vintage Motorcyle Info
    I have an 85 Z550 I am in the process of tinkering with. It has single pot calipers. Does anyone know if I can upgrade the calipers to something a bit beefier without modification. If so some advice on which calipers/disks to use would be helpful.
1-5 of 5 Results
Top