Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-14 of 14 Results
  1. Kawasaki Streetbikes/Sportbikes
    I have a 2002 ZRX1200R with 2,500 miles, essentially garaged all of it's life. I purchased it about 6 months ago and absolutely love it. Ran excellent and had no issues whatsoever other than needing a new set of tires. One day bike would not start and every one in a while (once every 30 seconds...
  2. Kawasaki Cruisers
    Morning all, I have a little situation here & I'm not the most knowledgeable person when it comes to electrical systems & would really appreciate any wisdom that you're willing to share with me. Current Date: 11/7/23 Bike: 2001 Vulcan VN800 (Regular, not the classic or the drifter)...
  3. FAQ'S
    I have a 96 kawasaki vulcan 800 classic when I let off the clutch no matter how slow or how much throttle it shuts down no jerk nothing runs fine in neutral
  4. Kawasaki Motocross and Offroad
    I have a kx125 with a frame vin of JKAKXRKC7WA026219 which shows for a 1998. My engine appears to be swapped. The engine vin is KX125KE0175. Could somebody help me figure out what year that codes for. Thank you much in advance.
  5. The Mechanics Corner
    So... to explain what exactly Im trying to figure out....Someone (definitely not me) stripped the inner threads of the oil pan drain hole like a jackass & now I'm leaking oil. So I'm trying to find either A: an oversized self threading oil drain bolt or B: A rubber drain plug to solve this issue...
  6. Kawasaki Streetbikes/Sportbikes
    So technically I dont have a bike, just couple motors to put on a dragster cart type deal. But What I have is a 1985 ZL-900 eliminator motor thats shaft driven, that I got to replace a 1975 z900 that was chain driven (case is cracked). But what I understand the GPz900R and the Zl-900 are the...
  7. Kawasaki ATV and Mule
    I recently replaced two gaskets on my Three-wheeler to stop an oil leak, one on the right side engine case/clutch cover and another on the left side (recoil starter cover). Everything went well. (or so I thought so) I haven't taken off the clutch cover before and wasn't sure if I put it back on...
  8. The Mechanics Corner
    Hello Kawasaki motorcycle forum mechanics. ive just purchased a 1982 kawasaki KZ305 CSR chain drive motorcycle. First kawasaki! Woo. so i am in search of a wiring diageam thats clear and readable on screen. All the ones ive come across for my specific bike are not clear and readable. And i am...
  9. Kawasaki Motocross and Offroad
    i have a 1997 kx 60 and the rear suspension is very soft so i took it all apart and the rod is not stock and i think that it is shorter then a stock one. i cant find the size of the stock rod i found several sites where people are selling them but they dont say the dimensions of it. i dont want...
  10. New Member Introductions
    Hi my name is Michael I'm a new member here but iv been poking around here for a wile. I'm a new rider and I got my first bike recently its a 1985 kawasaki ZN700-A2 but it has problems. Everything works except when I press the start button it doesn't turn over. But if I manually engage the...
  11. Main Lobby
    Hey everyone! I’m a fairly new rider with a 2015 Kawsaki Versys 650, I just moved on PCS from Texas to Virginia. After getting my bike from the crate where it was strapped down, the key goes in, turns from “off” to either wheel lock or “on” freely, but will not pass on to ignition. I’ve...
  12. Vintage Motorcyle Info
    got this bike for 200, needed a carb clean I got it running but leaks gas from the carb I checked it and the flout needle was damaged, so I’m thing about buying a pwk38mm carburetor I’m thinking it will fit, also I’m thinking about painting the hole bike black and sanding down the gas tank and...
  13. Kawasaki Cruisers
    I’ve got a 2007 Kawasaki Vulcan 500 and I really wasn’t a fan of how the original exhaust looked (as most don’t). I can say that the only thing I kinda liked was the almost dead silence it gave the bike, but I really wanted something that was a little louder and looked better. As the way things...
  14. The Mechanics Corner
    I just bought a 1982 KZ305B1 and I need to replace one of the carbs and rebuild the other. I can’t find a decent price for a rebuild kit anywhere and I can’t find a brand new OEM replacement Carburetor ANYWHERE!
1-14 of 14 Results
Top