Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-5 of 5 Results
  1. The Mechanics Corner
    Ok... this is my first post here but I feel like I'm out of ideas so... here goes nothing. Sorry for the wall of text. I bought an old kz305-a1 a few weeks ago and the guy I bought it from hooked up a battery (didn't come with it), crossed some wires onto the terminals, arced the solenoid, and...
  2. Kawasaki Cruisers
    I have a 2007 Vulcan vn2000... I had to replace the tail light and rear turn signals. I found all five wire matches. Running and brake light is fine. If I have the right signal wired and the left disconnected, the right works properly. When I have the left signal wired and the right...
  3. Kawasaki Cruisers
    I recently wanted to change the tail light on my Vulcan 1995 800, I order one on eBay and it came with 3 wires brown green and green with a white line in it. I connect all the wires and the brake turns on. But when I press the rear or the front brake the light doesn’t do anything doesn’t get...
  4. Vintage Motorcyle Info
    I'm helping an old guy from my work get his bike going again it's been stuck in the back of his place for the last twenty odd years after he rode it over from the coast. Lucky we are in the desert in the middle of Australia nothing rusts here its just too hot and dry. The wiring all looks pretty...
  5. Vintage Motorcyle Info
    I've recently acquired this F6 and the wiring on it has been screwed with by a previous owner. Each wire in the harness has been cut near the back of the bike and has been spliced with nothing but tape. It looks like someone has grafted in a harness from a similar (but different) model bike...
1-5 of 5 Results
Top