Kawasaki Motorcycle Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
my 2000 zx6r wont restart after it was dropped, the tach wont jump at all, I remember something about an inertia saftey switch in the owners manual so in the event of collision it shuts off the motor, but I dont know where this switch is! Any help would be great!

Thanks
 

·
Registered
Joined
·
71 Posts
Not heard of this Safety switch on a 2k 6R

The injected 03/04 models have a tip over sensor that shuts the motor off but re/sets when the bike is upright as they are a simple mercury switch.

You say it won't re start, Does the motor turn over ?
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
It turns over, but it wont start, the tach needle doesnt move at all, any help would be appreitiated!
 

·
Registered
Joined
·
71 Posts
How hard did the bike go down ?

Did you damage any of the engine covers ?

When you turn the ignition on do the clock needles sweep round then back to rest ?

Does the oil and neutral light come on with the ignition ?

Is the bike Alarmed if so does it still work ?

Have you checked all the Fuses ?
 
1 - 4 of 4 Posts
Top